12345678

12345678

ABCD

ABCD

DEAN RA SIZING & DIMENSIONS

INMM

Download PDF sheet

RA3146 SIZES:

‹ Prev Next › All 27 Sizes

DEAN RA3146 — 2 x 3 x 8-1/2

SIDE ELEVATION & SUCTION END VIEW · DWG. RA-1003 · NTS

Outline dimensions TBD for this size — weight, nozzle loads & frame data sourced below

Object Centerline Dimension Active / Hover TBD

Representative traced Dean RA vector outline · Click or hover any callout to highlight

OUTLINE DIMENSIONS (IN)

Callout	Dimension	Value (IN)

Flanges & Connections Guard (CG) & Baseplate Nozzle Loads & Sources

PUMP RESOURCE

Powered by Hagler Process

DWG NO.

PR-RA-3146-06

TITLE

DEAN RA SERIES — OUTLINE DIMENSIONS

MODEL

RA3146

SIZE

2 x 3 x 8-1/2

UNITS

IN

SCALE

NTS

REV

A

DATE

2026-10-23

SHEET

1 OF 1

SOURCE DWG

RA-1003

STATUS

REFERENCE

{"meta":{"title":"Dean RA Series - Outline Dimensions (Reference)","generated":"2026-10-23","units":"inches (mm derived as in x 25.4 unless the source prints mm)","sources":{"datapak":{"path":"Dean Series RA Data Pak (Met-Pro/Dean)","title_in_pdf":"https://www.cecoenviro.com/wp-content/uploads/2022/01/Dean-RA-datapak","note":"Met-Pro Dean Series RA data pak, Safari print 2022-04-07 (23 pp). Dimension drawings on PDF pp. 4-9. Drawings say: Do not use for construction unless certified."},"iom":{"path":"Tusk Dean Series RA IOM (2026, v1.0)","note":"Tusk IOM TUSK-IOM-DEAN-RA-001 v1.0 (May 2026), 36 pp. No outline dimension drawings in this document."}},"letter_convention":"Letters A1, A2, D, S, X, Y are the letters printed on data pak drawing RA-1003 (RA3146). RA-1103 (RA2096) and RA-2002 (RA3186) print the same features unlettered; they are mapped to the RA-1003 letter for the same feature. Refs 1/2/3 are unlettered on every source drawing."},"outline_keys":[{"key":"L","ref":"1","label":"Pump shaft end to discharge nozzle CL"},{"key":"Y","ref":"Y","label":"Discharge CL to suction flange face"},{"key":"X","ref":"X","label":"Shaft CL to discharge flange face"},{"key":"D","ref":"D","label":"Shaft CL to bottom of casing feet"},{"key":"S","ref":"S","label":"Suction CL offset from shaft CL"},{"key":"A1","ref":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)"},{"key":"A2","ref":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)"},{"key":"U","ref":"2","label":"Shaft diameter at coupling"},{"key":"KW","ref":"3","label":"Coupling keyway (width x depth)"}],"sizes":[{"id":"RA2096-1x1.5x6","frame":"RA2096","size_key":"1x1.5x6","size_display":"1 x 1-1/2 x 6","size_as_printed_iom":"1 X 11/2 X 6","discharge_nps_in":{"in":1.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"suction_nps_in":{"in":1.5,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"impeller_nominal_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":13.5,"print":"13.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Pump shaft end to discharge nozzle CL (unlettered on source). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; discharge CL to suction flange face (same feature as Y on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":{"in":6.5,"print":"6.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to discharge flange face (same feature as X on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":{"in":5.25,"print":"5.25","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to bottom of casing feet (same feature as D on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A1 on RA-1003 (shaft CL to outer edge of volute casing, viewed from suction end, left). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A2 on RA-1003 (right). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":0.875,"print":"0.8750 / 0.8745","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft dia. at coupling, drawn as 0.8750 / 0.8745 DIA. Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"3/16 x 3/32","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Keyway (string, not a length). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","text":true,"scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}}},"outline_extra":{"GH":{"ref":"4","label":"Shaft CL to top of barrier-oil fill connection (3/8 NPT)","value":{"in":7.75,"print":"7.75","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft CL to top of the 3/8 NPT barrier-oil fill connection (per M.E. spot-check; earlier mislabelled as coupling guard). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific)."}}},"flanges":{"discharge":{"nps":{"in":1.0,"print":"1","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":4.25,"print":"4 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.5625,"print":"9/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":3.125,"print":"3 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 1/2 in.","as_printed":"4-1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-1/2' = 4 bolts of 1/2 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":1.5,"print":"1 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.6875,"print":"11/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":3.875,"print":"3 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 1/2 in.","as_printed":"4-1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-1/2' = 4 bolts of 1/2 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 150","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 10","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column."},"facing_iom_2026":{"print":"Standard Raised Face (duplicated cell in IOM p.8 table)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"note":"Duplicated into the RA2096 column during table reformatting in TUSK-IOM-DEAN-RA-001 v1.0 p.8; actual RA2096 facing is Class 150 Flat Face."},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak_p2":{"print":"Flat Face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}},"facing_datapak":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column.","resolved":true}},"weight":{"lb":{"in":80.0,"print":"80","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":36.0,"print":"36","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":278.0,"Nm":377.0},"My":{"lbft":192.0,"Nm":260.4},"Mz":{"lbft":91.0,"Nm":123.4},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG","HS","HT"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)","HS":"Shaft CL to bottom of coupling guard","HT":"Coupling guard bolt-hole dia. (4 - HT DIA. HOLES)"},"rows":[["143T/145T","6.63","5.25","0.38"],["182T/184T","6.13","5.25","0.38"],["213T/215T","6.63","5.25","0.38"],["254T/256T","7.25","6.25","0.50"],["284TS/286TS","6.50","7.00","0.50"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"baseplate":{"columns":["motor_frame","C","AB","HA","HA1","HB","HD","HE","HG","HM"],"rows":[["143T","13 1/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["145T","13 3/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["182T","14 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["184T","15 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["213T","18 1/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["215T","19 5/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["254T","23 1/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["256T","24 7/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["284TS","25 1/2","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["286TS","27","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["324TS","28 3/8","14 3/4","12","16 1/2","45","13 3/4","4 1/2","3 3/4","22 1/2"]],"rows_in":[["143T",13.25,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["145T",13.75,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["182T",14.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["184T",15.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["213T",18.125,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["215T",19.625,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["254T",23.125,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["256T",24.875,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["284TS",25.5,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["286TS",27.0,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["324TS",28.375,14.75,12.0,16.5,45.0,13.75,4.5,3.75,22.5]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"pdf text layer","printed_page":4},"fixed_as_drawn":[{"print":"13.5","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4","desc":"Discharge CL to suction face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50 MAX.","desc":"Guard/motor height note (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4 - 3/4 dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"items":[{"print":"3 - 5/8 dia.","desc":"Hold-down holes: 2 casing-foot pads + 1 in the bearing-housing foot"},{"print":"6.0","desc":"Casing foot holes, transverse spacing (3.0 each side of CL)"},{"print":"8.0","desc":"Casing foot pads, transverse overall (4.0 each side of CL)"},{"print":"7.25","desc":"Bearing-housing foot hole to casing foot hole line (longitudinal)"},{"print":"4 - HT dia.","desc":"Coupling/fan guard bolt holes; HT = hole dia. per motor-frame table"},{"print":"6.250","desc":"Guard holes, longitudinal spacing"},{"print":"9.250","desc":"Guard holes, transverse spacing (4.625 each side of CL)"},{"print":"9.750","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of plan-view numbers for all three sizes, no size table."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CW","max_hp_3600":35,"max_hp_1800":15,"max_hp_1200":10,"thrust_bearing":"5306 2RS","l3d4_solid":"4.3","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":1.63,"mm":41.3,"print":"1.63"},"Seal chamber bore":{"in":2.06,"mm":52.4,"print":"2.06"},"Shaft dia. in seal chamber":{"in":1.13,"mm":28.6,"print":"1.13"},"Bearing span C to C":{"in":8.69,"mm":220.7,"print":"8.69"},"Radial bearing C to impeller C":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. at coupling":{"in":0.88,"mm":22.2,"print":"0.88"},"Shaft dia. between bearings":{"in":0.94,"mm":23.8,"print":"0.94"},"Shaft dia. at impeller":{"in":0.75,"mm":19.1,"print":"0.75"}}},"frame_conflicts":[],"links":{"product":{"url":"https://pumpresource.us/dean-ra2096-pump/","label":"Dean RA2096 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA2096 6\" Repair Kit 6138153","url":"https://pumpresource.us/dean-ra2096-6-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":null}},{"id":"RA2096-1.5x3x6","frame":"RA2096","size_key":"1.5x3x6","size_display":"1-1/2 x 3 x 6","size_as_printed_iom":"11/2 X 3 X 6","discharge_nps_in":{"in":1.5,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"impeller_nominal_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":13.5,"print":"13.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Pump shaft end to discharge nozzle CL (unlettered on source). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; discharge CL to suction flange face (same feature as Y on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":{"in":6.5,"print":"6.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to discharge flange face (same feature as X on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":{"in":5.25,"print":"5.25","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to bottom of casing feet (same feature as D on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A1 on RA-1003 (shaft CL to outer edge of volute casing, viewed from suction end, left). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A2 on RA-1003 (right). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":0.875,"print":"0.8750 / 0.8745","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft dia. at coupling, drawn as 0.8750 / 0.8745 DIA. Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"3/16 x 3/32","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Keyway (string, not a length). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","text":true,"scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}}},"outline_extra":{"GH":{"ref":"4","label":"Shaft CL to top of barrier-oil fill connection (3/8 NPT)","value":{"in":7.75,"print":"7.75","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft CL to top of the 3/8 NPT barrier-oil fill connection (per M.E. spot-check; earlier mislabelled as coupling guard). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific)."}}},"flanges":{"discharge":{"nps":{"in":1.5,"print":"1 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.6875,"print":"11/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":3.875,"print":"3 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 1/2 in.","as_printed":"4-1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-1/2' = 4 bolts of 1/2 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":7.5,"print":"7 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.9375,"print":"15/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 5/8 in.","as_printed":"4-5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-5/8' = 4 bolts of 5/8 in.; bolt-hole dia. not given."}},"marked_star_in_source":true},"flange_rating":{"ansi":{"print":"Class 150","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 10","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column."},"facing_iom_2026":{"print":"Standard Raised Face (duplicated cell in IOM p.8 table)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"note":"Duplicated into the RA2096 column during table reformatting in TUSK-IOM-DEAN-RA-001 v1.0 p.8; actual RA2096 facing is Class 150 Flat Face."},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak_p2":{"print":"Flat Face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}},"facing_datapak":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column.","resolved":true}},"weight":{"lb":{"in":90.0,"print":"90","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":41.0,"print":"41","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":277.0,"Nm":375.6},"My":{"lbft":265.0,"Nm":359.3},"Mz":{"lbft":91.0,"Nm":123.4},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG","HS","HT"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)","HS":"Shaft CL to bottom of coupling guard","HT":"Coupling guard bolt-hole dia. (4 - HT DIA. HOLES)"},"rows":[["143T/145T","6.63","5.25","0.38"],["182T/184T","6.13","5.25","0.38"],["213T/215T","6.63","5.25","0.38"],["254T/256T","7.25","6.25","0.50"],["284TS/286TS","6.50","7.00","0.50"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"baseplate":{"columns":["motor_frame","C","AB","HA","HA1","HB","HD","HE","HG","HM"],"rows":[["143T","13 1/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["145T","13 3/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["182T","14 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["184T","15 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["213T","18 1/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["215T","19 5/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["254T","23 1/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["256T","24 7/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["284TS","25 1/2","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["286TS","27","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["324TS","28 3/8","14 3/4","12","16 1/2","45","13 3/4","4 1/2","3 3/4","22 1/2"]],"rows_in":[["143T",13.25,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["145T",13.75,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["182T",14.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["184T",15.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["213T",18.125,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["215T",19.625,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["254T",23.125,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["256T",24.875,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["284TS",25.5,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["286TS",27.0,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["324TS",28.375,14.75,12.0,16.5,45.0,13.75,4.5,3.75,22.5]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"pdf text layer","printed_page":4},"fixed_as_drawn":[{"print":"13.5","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4","desc":"Discharge CL to suction face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50 MAX.","desc":"Guard/motor height note (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4 - 3/4 dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"items":[{"print":"3 - 5/8 dia.","desc":"Hold-down holes: 2 casing-foot pads + 1 in the bearing-housing foot"},{"print":"6.0","desc":"Casing foot holes, transverse spacing (3.0 each side of CL)"},{"print":"8.0","desc":"Casing foot pads, transverse overall (4.0 each side of CL)"},{"print":"7.25","desc":"Bearing-housing foot hole to casing foot hole line (longitudinal)"},{"print":"4 - HT dia.","desc":"Coupling/fan guard bolt holes; HT = hole dia. per motor-frame table"},{"print":"6.250","desc":"Guard holes, longitudinal spacing"},{"print":"9.250","desc":"Guard holes, transverse spacing (4.625 each side of CL)"},{"print":"9.750","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of plan-view numbers for all three sizes, no size table."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CW","max_hp_3600":35,"max_hp_1800":15,"max_hp_1200":10,"thrust_bearing":"5306 2RS","l3d4_solid":"4.3","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":1.63,"mm":41.3,"print":"1.63"},"Seal chamber bore":{"in":2.06,"mm":52.4,"print":"2.06"},"Shaft dia. in seal chamber":{"in":1.13,"mm":28.6,"print":"1.13"},"Bearing span C to C":{"in":8.69,"mm":220.7,"print":"8.69"},"Radial bearing C to impeller C":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. at coupling":{"in":0.88,"mm":22.2,"print":"0.88"},"Shaft dia. between bearings":{"in":0.94,"mm":23.8,"print":"0.94"},"Shaft dia. at impeller":{"in":0.75,"mm":19.1,"print":"0.75"}}},"frame_conflicts":[],"links":{"product":{"url":"https://pumpresource.us/dean-ra2096-pump/","label":"Dean RA2096 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA2096 6\" Repair Kit 6138153","url":"https://pumpresource.us/dean-ra2096-6-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":null}},{"id":"RA2096-1x1.5x8","frame":"RA2096","size_key":"1x1.5x8","size_display":"1 x 1-1/2 x 8","size_as_printed_iom":"1 X 11/2 X 8","discharge_nps_in":{"in":1.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"suction_nps_in":{"in":1.5,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":null},"impeller_nominal_in":{"in":8.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":13.5,"print":"13.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Pump shaft end to discharge nozzle CL (unlettered on source). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; discharge CL to suction flange face (same feature as Y on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":{"in":6.5,"print":"6.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to discharge flange face (same feature as X on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":{"in":5.25,"print":"5.25","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; shaft CL to bottom of casing feet (same feature as D on RA-1003). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A1 on RA-1003 (shaft CL to outer edge of volute casing, viewed from suction end, left). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":5.5,"print":"5.5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Unlettered on RA-1103; same feature as A2 on RA-1003 (right). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":0.875,"print":"0.8750 / 0.8745","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft dia. at coupling, drawn as 0.8750 / 0.8745 DIA. Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"3/16 x 3/32","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Keyway (string, not a length). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific).","text":true,"scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of outline numbers for all three sizes, no size table."}}},"outline_extra":{"GH":{"ref":"4","label":"Shaft CL to top of barrier-oil fill connection (3/8 NPT)","value":{"in":7.75,"print":"7.75","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"note":"Shaft CL to top of the 3/8 NPT barrier-oil fill connection (per M.E. spot-check; earlier mislabelled as coupling guard). Shared across RA2096 sizes: RA-1103 prints one set of outline numbers for 1x1.5x6, 1.5x3x6 and 1x1.5x8 with no size table (not size-specific)."}}},"flanges":{"discharge":{"nps":{"in":1.0,"print":"1","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":4.25,"print":"4 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.5625,"print":"9/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":3.125,"print":"3 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 1/2 in.","as_printed":"4-1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-1/2' = 4 bolts of 1/2 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":1.5,"print":"1 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"od":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"thk":{"in":0.6875,"print":"11/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bc":{"in":3.875,"print":"3 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"bolts":{"print":"4 x 1/2 in.","as_printed":"4-1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"text":true,"note":"Printed '4-1/2' = 4 bolts of 1/2 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 150","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 10","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column."},"facing_iom_2026":{"print":"Standard Raised Face (duplicated cell in IOM p.8 table)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"note":"Duplicated into the RA2096 column during table reformatting in TUSK-IOM-DEAN-RA-001 v1.0 p.8; actual RA2096 facing is Class 150 Flat Face."},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak_p2":{"print":"Flat Face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}},"facing_datapak":{"print":"Flat Face (Class 150)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3},"note":"Resolved (Blake / M.E. spot-check): RA2096 is Class 150 Flat Face (Data Pak p.2, RA-1103, RA-1123, and Tusk RWA IOM all agree). In TUSK-IOM-DEAN-RA-001 v1.0 p.8, the top table was reformatted with merged cells (also spanning RA2096's 100 psig max suction pressure across RA3146/3186 instead of their 260 psig rating) and duplicated \"Standard Raised Face\" into the RA2096 column.","resolved":true}},"weight":{"lb":{"in":85.0,"print":"85","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":39.0,"print":"39","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":278.0,"Nm":377.0},"My":{"lbft":132.0,"Nm":179.0},"Mz":{"lbft":91.0,"Nm":123.4},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG","HS","HT"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)","HS":"Shaft CL to bottom of coupling guard","HT":"Coupling guard bolt-hole dia. (4 - HT DIA. HOLES)"},"rows":[["143T/145T","6.63","5.25","0.38"],["182T/184T","6.13","5.25","0.38"],["213T/215T","6.63","5.25","0.38"],["254T/256T","7.25","6.25","0.50"],["284TS/286TS","6.50","7.00","0.50"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"pdf text layer","printed_page":3}},"baseplate":{"columns":["motor_frame","C","AB","HA","HA1","HB","HD","HE","HG","HM"],"rows":[["143T","13 1/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["145T","13 3/4","6 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","12 1/4"],["182T","14 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["184T","15 5/8","7 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","13 1/4"],["213T","18 1/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["215T","19 5/8","9 1/2","12",null,"39","8 1/2","4 1/2","3 1/4","14 1/4"],["254T","23 1/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["256T","24 7/8","11","15",null,"52","10 3/8","6","4 1/8","17 3/8"],["284TS","25 1/2","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["286TS","27","12 5/8","15",null,"52","11 1/8","6","4 1/8","18 7/8"],["324TS","28 3/8","14 3/4","12","16 1/2","45","13 3/4","4 1/2","3 3/4","22 1/2"]],"rows_in":[["143T",13.25,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["145T",13.75,6.5,12.0,null,39.0,8.5,4.5,3.25,12.25],["182T",14.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["184T",15.625,7.5,12.0,null,39.0,8.5,4.5,3.25,13.25],["213T",18.125,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["215T",19.625,9.5,12.0,null,39.0,8.5,4.5,3.25,14.25],["254T",23.125,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["256T",24.875,11.0,15.0,null,52.0,10.375,6.0,4.125,17.375],["284TS",25.5,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["286TS",27.0,12.625,15.0,null,52.0,11.125,6.0,4.125,18.875],["324TS",28.375,14.75,12.0,16.5,45.0,13.75,4.5,3.75,22.5]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"pdf text layer","printed_page":4},"fixed_as_drawn":[{"print":"13.5","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4","desc":"Discharge CL to suction face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"3.50 MAX.","desc":"Guard/motor height note (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}},{"print":"4 - 3/4 dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":5,"figure":"Dimension Dwg. RA-1123 (RA-2096 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":4}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3},"items":[{"print":"3 - 5/8 dia.","desc":"Hold-down holes: 2 casing-foot pads + 1 in the bearing-housing foot"},{"print":"6.0","desc":"Casing foot holes, transverse spacing (3.0 each side of CL)"},{"print":"8.0","desc":"Casing foot pads, transverse overall (4.0 each side of CL)"},{"print":"7.25","desc":"Bearing-housing foot hole to casing foot hole line (longitudinal)"},{"print":"4 - HT dia.","desc":"Coupling/fan guard bolt holes; HT = hole dia. per motor-frame table"},{"print":"6.250","desc":"Guard holes, longitudinal spacing"},{"print":"9.250","desc":"Guard holes, transverse spacing (4.625 each side of CL)"},{"print":"9.750","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA2096 sizes (not size-specific): RA-1103 prints one set of plan-view numbers for all three sizes, no size table."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":4,"figure":"Dimension Dwg. RA-1103 (RA-2096 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":3}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CW","max_hp_3600":35,"max_hp_1800":15,"max_hp_1200":10,"thrust_bearing":"5306 2RS","l3d4_solid":"4.3","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":1.63,"mm":41.3,"print":"1.63"},"Seal chamber bore":{"in":2.06,"mm":52.4,"print":"2.06"},"Shaft dia. in seal chamber":{"in":1.13,"mm":28.6,"print":"1.13"},"Bearing span C to C":{"in":8.69,"mm":220.7,"print":"8.69"},"Radial bearing C to impeller C":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. at coupling":{"in":0.88,"mm":22.2,"print":"0.88"},"Shaft dia. between bearings":{"in":0.94,"mm":23.8,"print":"0.94"},"Shaft dia. at impeller":{"in":0.75,"mm":19.1,"print":"0.75"}}},"frame_conflicts":[],"links":{"product":{"url":"https://pumpresource.us/dean-ra2096-pump/","label":"Dean RA2096 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA2096 8\" Repair Kit 6138154","url":"https://pumpresource.us/dean-ra2096-8-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":null}},{"id":"RA3146-1x3x8.5","frame":"RA3146","size_key":"1x3x8.5","size_display":"1 x 3 x 8-1/2","size_as_printed_iom":"1 X 3 X 81/2","discharge_nps_in":{"in":1.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":8.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":7.5,"print":"7 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":1.0,"print":"1","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":4.875,"print":"4 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":0.6875,"print":"11/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":3.5,"print":"3 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"4 x 5/8 in.","as_printed":"4-5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '4-5/8' = 4 bolts of 5/8 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":true},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":260.0,"print":"260","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":118.0,"print":"118","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":690.0,"Nm":935.6},"My":{"lbft":340.0,"Nm":461.0},"Mz":{"lbft":725.0,"Nm":983.1},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 1/2 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 8.5\" Repair Kit 6138148","url":"https://pumpresource.us/dean-ra3146-8-5-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 1 x 3 x 8-1/2","url":"https://pumpresource.us/dean-ra-rwa-1x3x8-5-and-1-5x3x8-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-1.5x3x8.5","frame":"RA3146","size_key":"1.5x3x8.5","size_display":"1-1/2 x 3 x 8-1/2","size_as_printed_iom":"11/2 X 3 X81/2","discharge_nps_in":{"in":1.5,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":8.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":8.5,"print":"8 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":1.5,"print":"1 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":6.125,"print":"6 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":0.8125,"print":"13/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":4.5,"print":"4 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"4 x 3/4 in.","as_printed":"4-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '4-3/4' = 4 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":288.0,"print":"288","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":131.0,"print":"131","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":690.0,"Nm":935.6},"My":{"lbft":340.0,"Nm":461.0},"Mz":{"lbft":725.0,"Nm":983.1},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 1/2 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 8.5\" Repair Kit 6138148","url":"https://pumpresource.us/dean-ra3146-8-5-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 1-1/2 x 3 x 8-1/2","url":"https://pumpresource.us/dean-ra-rwa-1x3x8-5-and-1-5x3x8-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-2x3x8.5","frame":"RA3146","size_key":"2x3x8.5","size_display":"2 x 3 x 8-1/2","size_as_printed_iom":"2 X 3 X 81/2","discharge_nps_in":{"in":2.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":8.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":9.5,"print":"9 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":2.0,"print":"2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":6.5,"print":"6 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":0.875,"print":"7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 5/8 in.","as_printed":"8-5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-5/8' = 8 bolts of 5/8 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":316.0,"print":"316","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":143.0,"print":"143","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":690.0,"Nm":935.6},"My":{"lbft":340.0,"Nm":461.0},"Mz":{"lbft":725.0,"Nm":983.1},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 1/2 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 8.5\" Repair Kit 6138148","url":"https://pumpresource.us/dean-ra3146-8-5-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 2 x 3 x 8-1/2","url":"https://pumpresource.us/dean-ra-rwa-2x3x8-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-3x4x8.5","frame":"RA3146","size_key":"3x4x8.5","size_display":"3 x 4 x 8-1/2","size_as_printed_iom":"3 X 4 X 81/2","discharge_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":4.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":8.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":11.0,"print":"11","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":9.0,"print":"9","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.25,"print":"1 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":7.875,"print":"7 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":true},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":344.0,"print":"344","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":156.0,"print":"156","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":725.0,"Nm":983.1},"My":{"lbft":295.0,"Nm":400.0},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"3/4 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 3/4 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 8.5\" Repair Kit 6138148","url":"https://pumpresource.us/dean-ra3146-8-5-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 3 x 4 x 8-1/2","url":"https://pumpresource.us/dean-ra-rwa-3x4x8-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-4x6x8.5","frame":"RA3146","size_key":"4x6x8.5","size_display":"4 x 6 x 8-1/2","size_as_printed_iom":"4 X 6 X 81/2","discharge_nps_in":{"in":4.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":6.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":8.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":11.5,"print":"11 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.625,"print":"5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":10.25,"print":"10 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.125,"print":"8 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.25,"print":"1 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":7.875,"print":"7 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":12.5,"print":"12 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.4375,"print":"1 7/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":10.625,"print":"10 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"12 x 3/4 in.","as_printed":"12-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '12-3/4' = 12 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":true},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":390.0,"print":"390","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":177.0,"print":"177","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":785.0,"Nm":1064.5},"My":{"lbft":320.0,"Nm":433.9},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"3/4 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 3/4 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 8.5\" Repair Kit 6138148","url":"https://pumpresource.us/dean-ra3146-8-5-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 4 x 6 x 8-1/2","url":"https://pumpresource.us/dean-ra-rwa-4x6x8-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-1.5x3x10","frame":"RA3146","size_key":"1.5x3x10","size_display":"1-1/2 x 3 x 10","size_as_printed_iom":"11/2 X 3 X 10","discharge_nps_in":{"in":1.5,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":9.0,"print":"9","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":9.0,"print":"9","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.75,"print":"8 3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":1.5,"print":"1 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":6.125,"print":"6 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":0.8125,"print":"13/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":4.5,"print":"4 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"4 x 3/4 in.","as_printed":"4-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '4-3/4' = 4 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":318.0,"print":"318","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":144.0,"print":"144","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":760.0,"Nm":1030.6},"My":{"lbft":310.0,"Nm":420.4},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 1/2 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 10\" Repair Kit 6138149","url":"https://pumpresource.us/dean-ra3146-10-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 1-1/2 x 3 x 10","url":"https://pumpresource.us/dean-ra-rwa-1-5x3x10-and-2x3x10-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-2x3x10","frame":"RA3146","size_key":"2x3x10","size_display":"2 x 3 x 10","size_as_printed_iom":"2 X 3 X 10","discharge_nps_in":{"in":2.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":9.5,"print":"9 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":9.0,"print":"9","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.75,"print":"8 3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":2.0,"print":"2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":6.5,"print":"6 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":0.875,"print":"7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 5/8 in.","as_printed":"8-5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-5/8' = 8 bolts of 5/8 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":350.0,"print":"350","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":159.0,"print":"159","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":760.0,"Nm":1030.6},"My":{"lbft":310.0,"Nm":420.4},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"1/2 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 1/2 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 10\" Repair Kit 6138149","url":"https://pumpresource.us/dean-ra3146-10-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 2 x 3 x 10","url":"https://pumpresource.us/dean-ra-rwa-1-5x3x10-and-2x3x10-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-3x4x10","frame":"RA3146","size_key":"3x4x10","size_display":"3 x 4 x 10","size_as_printed_iom":"3 X 4 X 10","discharge_nps_in":{"in":3.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":4.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":5.0,"print":"5","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":11.0,"print":"11","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.0,"print":"0","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":10.375,"print":"10 3/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":8.75,"print":"8 3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":3.0,"print":"3","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":8.25,"print":"8 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.125,"print":"1 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":6.625,"print":"6 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.25,"print":"1 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":7.875,"print":"7 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":385.0,"print":"385","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":175.0,"print":"175","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":830.0,"Nm":1125.5},"My":{"lbft":340.0,"Nm":461.0},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"3/4 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 3/4 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 10\" Repair Kit 6138149","url":"https://pumpresource.us/dean-ra3146-10-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 3 x 4 x 10","url":"https://pumpresource.us/dean-ra-rwa-3x4x10-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-4x6x10-2","frame":"RA3146","size_key":"4x6x10#2","size_display":"4 x 6 x 10 #2","size_as_printed_iom":"4 X 6 X 10 #2","discharge_nps_in":{"in":4.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"suction_nps_in":{"in":6.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":null},"impeller_nominal_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":19.5,"print":"19.50","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Pump shaft end to discharge nozzle CL (unlettered; same value repeated on RA-1023 baseplate drawing). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"Y":{"ref":"Y","letter_on_source":"Y","label":"Discharge CL to suction flange face","value":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"X":{"ref":"X","letter_on_source":"X","label":"Shaft CL to discharge flange face","value":{"in":12.5,"print":"12 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"D":{"ref":"D","letter_on_source":"D","label":"Shaft CL to bottom of casing feet","value":{"in":11.5,"print":"11 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"S":{"ref":"S","letter_on_source":"S","label":"Suction CL offset from shaft CL","value":{"in":0.125,"print":"1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A1":{"ref":"A1","letter_on_source":"A1","label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":{"in":11.75,"print":"11 3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"A2":{"ref":"A2","letter_on_source":"A2","label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"note":"Lettered on RA-1003 size table."}},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.125,"print":"1.1250 / 1.1245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Shaft dia. at coupling, drawn as 1.1250 / 1.1245 DIA (kept). CONFLICT: Tusk IOM 2026 p.8 lists 1.06 in / 27.0 mm - likely a transcription error in the IOM (per M.E. spot-check). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"1/4 x 1/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"Keyway (string). Printed once on RA-1003 for all 9 RA3146 8.5/10 in. sizes (not size-specific).","text":true,"scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."}}},"outline_extra":{},"flanges":{"discharge":{"nps":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.25,"print":"1 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":7.875,"print":"7 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"od":{"in":12.5,"print":"12 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"thk":{"in":1.4375,"print":"1 7/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bc":{"in":10.625,"print":"10 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"bolts":{"print":"12 x 3/4 in.","as_printed":"12-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5},"text":true,"note":"Printed '12-3/4' = 12 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}}},"weight":{"lb":{"in":455.0,"print":"455","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":206.0,"print":"206","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":950.0,"Nm":1288.2},"My":{"lbft":340.0,"Nm":461.0},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)"},"rows":[["143T/145T","6.81"],["182T/184T","6.13"],["213T/215T","6.63"],["254T/256T","7.25"],["284TS/286TS","6.50"],["324TS/326TS","7.13"],["364TS/365TS","7.13"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"pdf text layer","printed_page":5}},"baseplate":{"columns":["motor_frame","C","AB","HA","HB","HG","HH","HM_D8.25","HM_D10","HM_D11.5"],"rows":[["143T","13 1/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["145T","13 3/4","6 1/2","12","45","3 3/4","3/4","15 7/8","17 5/8","19 1/8"],["182T","14 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["184T","15 5/8","7 1/2","12","45","3 3/4","3/4","17 1/4","19","20 1/2"],["213T","18 1/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["215T","19 5/8","9 1/2","12","45","3 3/4","3/4","18","19 3/4","21 1/4"],["254T","23 1/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["256T","24 7/8","10 3/4","15","52","4 1/8","3/4","19 3/8","21 1/8","22 5/8"],["284T","26 7/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["284TS","25 1/2","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286T","28 3/8","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["286TS","27","12 5/8","15","52","4 1/8","3/4","20 1/8","21 7/8","23 3/8"],["324T","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["324TS","28 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326T","31 3/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["326TS","29 7/8","14 3/4","18","58","4 3/4","1","21 3/4","23 1/2","25"],["364T","33 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["364TS","31 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365T","34 1/8","15 5/8","18","58","4 3/4","1",null,"24 5/8",null],["365TS","32 1/2","15 5/8","18","58","4 3/4","1",null,"24 5/8",null]],"rows_in":[["143T",13.25,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["145T",13.75,6.5,12.0,45.0,3.75,0.75,15.875,17.625,19.125],["182T",14.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["184T",15.625,7.5,12.0,45.0,3.75,0.75,17.25,19.0,20.5],["213T",18.125,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["215T",19.625,9.5,12.0,45.0,3.75,0.75,18.0,19.75,21.25],["254T",23.125,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["256T",24.875,10.75,15.0,52.0,4.125,0.75,19.375,21.125,22.625],["284T",26.875,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["284TS",25.5,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286T",28.375,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["286TS",27.0,12.625,15.0,52.0,4.125,0.75,20.125,21.875,23.375],["324T",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["324TS",28.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326T",31.375,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["326TS",29.875,14.75,18.0,58.0,4.75,1.0,21.75,23.5,25.0],["364T",33.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["364TS",31.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365T",34.125,15.625,18.0,58.0,4.75,1.0,null,24.625,null],["365TS",32.5,15.625,18.0,58.0,4.75,1.0,null,24.625,null]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"pdf text layer","printed_page":6},"fixed_as_drawn":[{"print":"19.50","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"3.50","desc":"Motor-side shaft-end gap reference (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4.50","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.500 / 1.500","desc":"Foundation bolt hole to CL of pump and baseplate (each side)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"1.250","desc":"Foundation bolt hole to baseplate end","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}},{"print":"4 - HH dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":7,"figure":"Dimension Dwg. RA-1023 (RA-3146 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":6}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"items":[{"print":"2 - 5/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"9.75","desc":"Casing foot holes, transverse spacing (4.88 each side of CL)"},{"print":"11.75","desc":"Casing feet, transverse overall"},{"print":"3.00 x 2.00","desc":"Casing foot pad (as drawn)"},{"print":"2 - 5/8 x 7/8 slots","desc":"Bearing-housing foot slots"},{"print":"7.25","desc":"Bearing-housing foot slots, transverse spacing (3.63 each side of CL)"},{"print":"12.50","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 1/2 dia.","desc":"Coupling/fan guard holes"},{"print":"6.25","desc":"Guard holes, longitudinal spacing"},{"print":"10.25","desc":"Guard holes, transverse spacing (5.125 each side of CL)"},{"print":"15.75","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source.","scope":"Shared across RA-1003 sizes (not size-specific): printed once for all 9 RA3146 8.5/10 in. sizes."},"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5}},{"name":"Casing drain","print":"3/4 NPT","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":6,"figure":"Dimension Dwg. RA-1003 (RA-3146 with shaft fan, pump only) - size table","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":5},"note":"RA-1003 note: 1/2 NPT casing drain; 3/4 NPT with 3 in. and 4 in. discharge. This size: 3/4 NPT only."}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3146 10\" Repair Kit 6138149","url":"https://pumpresource.us/dean-ra3146-10-repair-kit/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":{"label":"Impeller for 4 x 6 x 10 #2","url":"https://pumpresource.us/dean-ra-4x6x10-2-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-1x2x11.5","frame":"RA3146","size_key":"1x2x11.5","size_display":"1 x 2 x 11-1/2","size_as_printed_iom":"1 X 2 X 111/2","discharge_nps_in":{"in":1.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":2.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":11.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}}},"weight":{"lb":{"in":335.0,"print":"335","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":152.0,"print":"152","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":850.0,"Nm":1152.6},"My":{"lbft":350.0,"Nm":474.6},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3146-1.5x3x11.5","frame":"RA3146","size_key":"1.5x3x11.5","size_display":"1-1/2 x 3 x 11-1/2","size_as_printed_iom":"11/2 X 3 X 111/2","discharge_nps_in":{"in":1.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":11.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}}},"weight":{"lb":{"in":375.0,"print":"375","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":170.0,"print":"170","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":850.0,"Nm":1152.6},"My":{"lbft":350.0,"Nm":474.6},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3146-2x3x11.5","frame":"RA3146","size_key":"2x3x11.5","size_display":"2 x 3 x 11-1/2","size_as_printed_iom":"2 X 3 X 111/2","discharge_nps_in":{"in":2.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":11.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}}},"weight":{"lb":{"in":415.0,"print":"415","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":188.0,"print":"188","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":870.0,"Nm":1179.72},"My":{"lbft":355.0,"Nm":481.38},"Mz":{"lbft":600.0,"Nm":813.6},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3146-3x4x11.5","frame":"RA3146","size_key":"3x4x11.5","size_display":"3 x 4 x 11-1/2","size_as_printed_iom":"3 X 4 X 111/2","discharge_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":11.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}}},"weight":{"lb":{"in":450.0,"print":"450","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":204.0,"print":"204","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":930.0,"Nm":1261.08},"My":{"lbft":335.0,"Nm":454.26},"Mz":{"lbft":575.0,"Nm":779.7},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":{"label":"Impeller for 3 x 4 x 11-1/2","url":"https://pumpresource.us/dean-ra-rwa-r-series-3x4x11-5-impeller/","source":"Verified live on pumpresource.us (HTTP 200)"}}},{"id":"RA3146-4x6x11.5","frame":"RA3146","size_key":"4x6x11.5","size_display":"4 x 6 x 11-1/2","size_as_printed_iom":"4 X 6 X 111/2","discharge_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":11.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":2,"figure":"Mechanical Design Specifications (data pak)","method":"pdf text layer"}}},"weight":{"lb":{"in":540.0,"print":"540","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":245.0,"print":"245","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":980.0,"Nm":1328.88},"My":{"lbft":350.0,"Nm":474.6},"Mz":{"lbft":760.0,"Nm":1030.56},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":100,"max_hp_1800":40,"max_hp_1200":25,"thrust_bearing":"7308 BG","l3d4_solid":"2.1","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":2.81,"mm":71.5,"print":"2.81"},"Seal chamber bore":{"in":3.13,"mm":79.4,"print":"3.13"},"Shaft dia. in seal chamber":{"in":1.75,"mm":44.5,"print":"1.75"},"Bearing span C to C":{"in":11.44,"mm":290.5,"print":"11.44"},"Radial bearing C to impeller C":{"in":2.31,"mm":58.7,"print":"2.31"},"Shaft dia. at coupling":{"in":1.06,"mm":27.0,"print":"1.06"},"Shaft dia. between bearings":{"in":1.56,"mm":39.7,"print":"1.56"},"Shaft dia. at impeller":{"in":1.13,"mm":28.6,"print":"1.13"}}},"frame_conflicts":[{"item":"Shaft dia. at coupling","kept":"1.1250 / 1.1245 (RA-1003)","other":"1.06 in / 27.0 mm (Tusk IOM 2026 p.8)","note":"IOM 1.06 is likely a transcription error; drawing value kept."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3146-pump/","label":"Dean RA3146 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-1.5x3x13.5","frame":"RA3186","size_key":"1.5x3x13.5","size_display":"1-1/2 x 3 x 13-1/2","size_as_printed_iom":"11/2 X 3 X 131/2","discharge_nps_in":{"in":1.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":13.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":540.0,"print":"540","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":245.0,"print":"245","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":1015.0,"Nm":1376.34},"My":{"lbft":365.0,"Nm":494.94},"Mz":{"lbft":525.0,"Nm":711.9},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-2x3x13.5","frame":"RA3186","size_key":"2x3x13.5","size_display":"2 x 3 x 13-1/2","size_as_printed_iom":"2 X 3 X 131/2","discharge_nps_in":{"in":2.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":13.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":560.0,"print":"560","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":254.0,"print":"254","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":1015.0,"Nm":1376.34},"My":{"lbft":365.0,"Nm":494.94},"Mz":{"lbft":525.0,"Nm":711.9},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-3x4x13.5","frame":"RA3186","size_key":"3x4x13.5","size_display":"3 x 4 x 13-1/2","size_as_printed_iom":"3 X 4 X 131/2","discharge_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":13.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":570.0,"print":"570","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":259.0,"print":"259","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":1045.0,"Nm":1417.02},"My":{"lbft":375.0,"Nm":508.5},"Mz":{"lbft":630.0,"Nm":854.28},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-4x6x10-1","frame":"RA3186","size_key":"4x6x10#1","size_display":"4 x 6 x 10 #1","size_as_printed_iom":"4 X 6 X 10 #1","discharge_nps_in":{"in":4.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7},"note":null},"suction_nps_in":{"in":6.0,"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7},"note":null},"impeller_nominal_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":{"in":26.0,"print":"26.00","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Pump shaft end to discharge nozzle CL (unlettered)."}},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":{"in":6.0,"print":"6.00","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlettered on RA-2002; discharge CL to suction flange face. Letter inferred from RA-1003: RA-2002 has no letters on its dimensions."},"letter_inferred":true},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":{"in":12.0,"print":"12.00","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlettered on RA-2002; shaft CL to discharge flange face. Letter inferred from RA-1003: RA-2002 has no letters on its dimensions."},"letter_inferred":true},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":{"in":12.0,"print":"12.000","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlettered on RA-2002; shaft CL to bottom of casing feet. Letter inferred from RA-1003: RA-2002 has no letters on its dimensions."},"letter_inferred":true},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":{"in":0.25,"print":"0.25","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlettered on RA-2002; suction CL offset from shaft CL. Letter S inferred from RA-1003 (RA-2002 has no letters) - the 0.25 offset is the least certain assignment; verify."},"letter_inferred":true},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":{"in":1.625,"print":"1.6250 / 1.6245","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Shaft dia. at coupling, drawn as 1.6250 / 1.6245 DIA."}},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":{"in":null,"print":"3/8 x 3/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Keyway (string).","text":true}}},"outline_extra":{"R35":{"ref":"5","label":"Pump shaft end to end of shaft extension at bearing frame","value":{"in":3.5,"print":"3.500","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlabelled on RA-2002; description inferred from drawing geometry - verify. Not captured before M.E. spot-check."}},"R15":{"ref":"6","label":"Casing foot pad height (bottom of foot to top of pad)","value":{"in":1.5,"print":"1.500","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"note":"Unlabelled on RA-2002; description inferred from drawing geometry - verify. Not captured before M.E. spot-check."}}},"flanges":{"discharge":{"nps":{"in":4.0,"print":"4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"od":{"in":10.0,"print":"10","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"thk":{"in":1.25,"print":"1 1/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"bc":{"in":7.875,"print":"7 7/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"bolts":{"print":"8 x 3/4 in.","as_printed":"8-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7},"text":true,"note":"Printed '8-3/4' = 8 bolts of 3/4 in.; bolt-hole dia. not given."}},"suction":{"nps":{"in":6.0,"print":"6","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"od":{"in":12.5,"print":"12 1/2","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"thk":{"in":1.4375,"print":"1 7/16","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"bc":{"in":10.625,"print":"10 5/8","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"bolts":{"print":"12 x 3/4 in.","as_printed":"12-3/4","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7},"text":true,"note":"Printed '12-3/4' = 12 bolts of 3/4 in.; bolt-hole dia. not given."}},"marked_star_in_source":false},"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_datapak":{"print":"Raised Face (Class 300)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}}},"weight":{"lb":{"in":510.0,"print":"510","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":231.0,"print":"231","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":2300.0,"Nm":3118.8},"My":{"lbft":1850.0,"Nm":2508.6},"Mz":{"lbft":800.0,"Nm":1084.8},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":{"label":"Shaft end to coupling-guard end (by motor frame)","columns":["motor_frame","CG","cpl_spacer"],"column_desc":{"CG":"Pump shaft end to motor-side end of coupling guard (NOT centre of gravity)","cpl_spacer":"Coupling spacer length"},"rows":[["254T/256T","9.13","5.0"],["284T/286T","9.75","5.0"],["324T/326T","10.38","5.0"],["364T/365T","11.00","5.0"],["364TS/365TS","8.88","5.0"],["404TS/405TS","9.38","5.0"],["444T/445T","14.63","6.0"],["444TS/445TS","9.88","5.0"],["447TS/449TS","9.88","5.0"]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"pdf text layer","printed_page":7}},"baseplate":{"columns":["motor_frame","C","AB","HB","HM","grout_holes"],"rows":[["254T","22 7/8","11","68","24 7/8","3"],["256T","24 3/4","11","68","24 7/8","3"],["284T","26 3/4","12 3/4","68","25 5/8","3"],["286T","28 1/4","12 3/4","68","25 5/8","3"],["324TS","28 1/4","14 3/4","72","26 5/8","3"],["324T","29 3/4","14 3/4","72","26 5/8","3"],["326TS","29 3/4","14 3/4","72","26 5/8","3"],["326T","31 1/4","14 3/4","72","26 5/8","3"],["364TS","31 1/4","16 1/4","72","27 7/8","3"],["364T","32 7/8","16 1/4","72","27 7/8","3"],["365TS","32 1/4","16 1/4","72","27 7/8","3"],["365T","33 7/8","16 1/4","72","27 7/8","3"],["404TS","33 1/2","17 1/2","78","28 7/8","5"],["404T","36 1/2","17 1/2","78","28 7/8","5"],["405TS","35","17 1/2","78","28 7/8","5"],["405T","38","17 1/2","78","28 7/8","5"],["444TS","38 1/2","18 1/2","82","30 3/8","5"],["445TS","40 1/2","18 1/2","82","30 3/8","5"]],"rows_in":[["254T",22.875,11.0,68.0,24.875,3.0],["256T",24.75,11.0,68.0,24.875,3.0],["284T",26.75,12.75,68.0,25.625,3.0],["286T",28.25,12.75,68.0,25.625,3.0],["324TS",28.25,14.75,72.0,26.625,3.0],["324T",29.75,14.75,72.0,26.625,3.0],["326TS",29.75,14.75,72.0,26.625,3.0],["326T",31.25,14.75,72.0,26.625,3.0],["364TS",31.25,16.25,72.0,27.875,3.0],["364T",32.875,16.25,72.0,27.875,3.0],["365TS",32.25,16.25,72.0,27.875,3.0],["365T",33.875,16.25,72.0,27.875,3.0],["404TS",33.5,17.5,78.0,28.875,5.0],["404T",36.5,17.5,78.0,28.875,5.0],["405TS",35.0,17.5,78.0,28.875,5.0],["405T",38.0,17.5,78.0,28.875,5.0],["444TS",38.5,18.5,82.0,30.375,5.0],["445TS",40.5,18.5,82.0,30.375,5.0]],"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"pdf text layer","printed_page":8},"fixed_as_drawn":[{"print":"26.000","desc":"Pump shaft end to discharge CL","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"6.00","desc":"Discharge CL to suction face","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"9.000","desc":"Discharge CL to pump end of baseplate (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"26.00","desc":"Baseplate width (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"3.000","desc":"Foundation bolt hole to baseplate edge","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"24.000","desc":"Foundation bolt hole spacing, longitudinal (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"6 - 1.25 dia.","desc":"Foundation bolt holes","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"7.00 / 6.125","desc":"Baseplate height references (as drawn)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"19 sq. in.","desc":"Grout hole area per bulkhead section","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"1 in. NPT","desc":"Baseplate drain","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}},{"print":"444T/445T","desc":"Motor frames requiring a 6 in. coupling spacer (note)","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":9,"figure":"Dimension Dwg. RA-2032 (RA-3186 on baseplate)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":8}}]},"mounting_plan":{"source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7},"items":[{"print":"8 - 7/8 dia.","desc":"Casing foot bolt holes (qty - size)"},{"print":"4.000 x 4.000","desc":"Hole pattern per casing foot pad (as drawn)"},{"print":"2 - 7/8 x 1 1/8 slots","desc":"Bearing-housing foot slots"},{"print":"11.88","desc":"Bearing-housing foot slots, transverse spacing (5.94 each side of CL)"},{"print":"18.000","desc":"Bearing-housing foot slot line to casing foot hole line (longitudinal)"},{"print":"4 - 7/16 dia.","desc":"Coupling guard holes"},{"print":"8.000","desc":"Guard holes, longitudinal spacing"},{"print":"12.50","desc":"Guard holes, transverse spacing (6.25 each side of CL)"},{"print":"25.250","desc":"Pump-side guard hole to casing foot hole line (longitudinal)"},{"print":"10.50 / 12.25","desc":"Casing feet, CL to outer edge (one side / other side, as drawn)"}],"caveat":"Values read from drawing image; descriptions inferred from drawing geometry - verify against source."},"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Discharge gauge connection","print":"1/2 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7}},{"name":"Casing drain","print":"3/4 NPT, when specified","source":{"file":"Dean Series RA Data Pak (Met-Pro/Dean)","pdf_page":8,"figure":"Dimension Dwg. RA-2002 (RA-3186 with shaft fan, pump only)","method":"read from drawing image (300 dpi render, cropped and re-read)","printed_page":7}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":{"label":"Dean RA3186 Repair Kit 6138171 (4x6x10 #1 only)","url":"https://pumpresource.us/dean-ra3186-repair-kit-6138171/","source":"Verified live on pumpresource.us (HTTP 200)"},"impeller":null}},{"id":"RA3186-6x8x12.5","frame":"RA3186","size_key":"6x8x12.5","size_display":"6 x 8 x 12-1/2","size_as_printed_iom":"6 X 8 X 121/2","discharge_nps_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":8.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":12.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":660.0,"print":"660","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":299.0,"print":"299","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":2740.0,"Nm":3715.44},"My":{"lbft":1490.0,"Nm":2020.44},"Mz":{"lbft":800.0,"Nm":1084.8},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-2x4x15.5","frame":"RA3186","size_key":"2x4x15.5","size_display":"2 x 4 x 15-1/2","size_as_printed_iom":"2 X 4 X 151/2","discharge_nps_in":{"in":2.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":15.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":672.0,"print":"672","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":305.0,"print":"305","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":2530.0,"Nm":3430.68},"My":{"lbft":1375.0,"Nm":1864.5},"Mz":{"lbft":800.0,"Nm":1084.8},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-3x4x15.5","frame":"RA3186","size_key":"3x4x15.5","size_display":"3 x 4 x 15-1/2","size_as_printed_iom":"3 X 4 X 151/2","discharge_nps_in":{"in":3.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":15.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":694.0,"print":"694","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":315.0,"print":"315","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":2550.0,"Nm":3457.8},"My":{"lbft":1385.0,"Nm":1878.06},"Mz":{"lbft":800.0,"Nm":1084.8},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3186-4x6x15.5","frame":"RA3186","size_key":"4x6x15.5","size_display":"4 x 6 x 15-1/2","size_as_printed_iom":"4 X 6 X 151/2","discharge_nps_in":{"in":4.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":15.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":650.0,"print":"650","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":295.0,"print":"295","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":2740.0,"Nm":3715.44},"My":{"lbft":1490.0,"Nm":2020.44},"Mz":{"lbft":800.0,"Nm":1084.8},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7311 BG","l3d4_solid":"2.8","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.88,"mm":98.4,"print":"3.88"},"Seal chamber bore":{"in":4.31,"mm":109.5,"print":"4.31"},"Shaft dia. in seal chamber":{"in":2.25,"mm":57.2,"print":"2.25"},"Bearing span C to C":{"in":14.63,"mm":371.5,"print":"14.63"},"Radial bearing C to impeller C":{"in":3.25,"mm":82.6,"print":"3.25"},"Shaft dia. at coupling":{"in":1.63,"mm":41.3,"print":"1.63"},"Shaft dia. between bearings":{"in":1.88,"mm":47.6,"print":"1.88"},"Shaft dia. at impeller":{"in":1.5,"mm":38.1,"print":"1.50"}}},"frame_conflicts":[{"item":"Shaft dia. at impeller","kept":"1.50 in / 38.1 mm (Tusk IOM 2026 p.8)","other":"1-1/8 in (data pak p.2 spec)","note":"Data pak 1-1/8 looks copied from the RA3146 column; neither drawing dimensions it."}],"links":{"product":{"url":"https://pumpresource.us/dean-ra3186-pump/","label":"Dean RA3186 Pump","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3246-6x8x15.5","frame":"RA3246","size_key":"6x8x15.5","size_display":"6 x 8 x 15-1/2","size_as_printed_iom":"6 X 8 X 151/2","discharge_nps_in":{"in":6.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":8.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":15.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":1023.0,"print":"1023","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":464.0,"print":"464","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":3000.0,"Nm":4068.0},"My":{"lbft":1615.0,"Nm":2189.94},"Mz":{"lbft":1500.0,"Nm":2034.0},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7314 BG","l3d4_solid":"1.5","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.68,"mm":93.6,"print":"3.68"},"Seal chamber bore":{"in":5.0,"mm":127.0,"print":"5.00"},"Shaft dia. in seal chamber":{"in":3.0,"mm":76.2,"print":"3.00"},"Bearing span C to C":{"in":18.97,"mm":482.0,"print":"18.97"},"Radial bearing C to impeller C":{"in":4.15,"mm":105.5,"print":"4.15"},"Shaft dia. at coupling":{"in":2.38,"mm":60.3,"print":"2.38"},"Shaft dia. between bearings":{"in":2.63,"mm":66.8,"print":"2.63"},"Shaft dia. at impeller":{"in":2.25,"mm":57.2,"print":"2.25"}}},"frame_conflicts":[],"links":{"product":{"url":"https://pumpresource.us/pumps/dean-pumps/ra-series/","label":"Dean RA Series Pumps","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}},{"id":"RA3246-8x10x15.5","frame":"RA3246","size_key":"8x10x15.5","size_display":"8 x 10 x 15-1/2","size_as_printed_iom":"8 X 10 X 151/2","discharge_nps_in":{"in":8.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (discharge x suction x nominal impeller), convention confirmed by data pak drawings RA-1103/RA-1003/RA-2002 flange tables."},"suction_nps_in":{"in":10.0,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Derived from size designation (see discharge note)."},"impeller_nominal_in":{"in":15.5,"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"note":"Nominal impeller size from designation."},"outline_drawing":null,"outline":{"L":{"ref":"1","letter_on_source":null,"label":"Pump shaft end to discharge nozzle CL","value":null},"Y":{"ref":"Y","letter_on_source":null,"label":"Discharge CL to suction flange face","value":null},"X":{"ref":"X","letter_on_source":null,"label":"Shaft CL to discharge flange face","value":null},"D":{"ref":"D","letter_on_source":null,"label":"Shaft CL to bottom of casing feet","value":null},"S":{"ref":"S","letter_on_source":null,"label":"Suction CL offset from shaft CL","value":null},"A1":{"ref":"A1","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, left (viewed from suction end)","value":null},"A2":{"ref":"A2","letter_on_source":null,"label":"Shaft CL to outer edge of volute casing, right (viewed from suction end)","value":null},"U":{"ref":"2","letter_on_source":null,"label":"Shaft diameter at coupling","value":null},"KW":{"ref":"3","letter_on_source":null,"label":"Coupling keyway (width x depth)","value":null}},"outline_extra":{},"flanges":null,"flange_rating":{"ansi":{"print":"Class 300","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"din_optional":{"print":"PN 25","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing":{"print":"Raised Face (Class 300)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"facing_iom_2026":{"print":"Standard Raised Face","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}},"finish":{"print":"125 Ra","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8}}},"weight":{"lb":{"in":1075.0,"print":"1075","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"kg":{"in":488.0,"print":"488","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15}},"basis":"Weight pump only"},"nozzle_moments":{"Mx":{"lbft":3340.0,"Nm":4529.04},"My":{"lbft":1810.0,"Nm":2454.36},"Mz":{"lbft":1500.0,"Nm":2034.0},"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Max moments / Weight Pump Only table","method":"pdf text layer","printed_page":15},"basis":"Maximum moments applied to a pump on a fully bolted and grouted baseplate"},"guard_by_motor_frame":null,"baseplate":null,"mounting_plan":null,"ports":[{"name":"Seal vent","print":"1/2 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil fill","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Barrier oil drain","print":"3/8 NPT","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}},{"name":"Bearing grease relief","print":"1/8 NPT (plugged)","source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":15,"figure":"Figure 9 - Bearing Housing Port Connections","method":"read from figure image (250 dpi render)","printed_page":15}}],"frame_data":{"source":{"file":"Tusk Dean Series RA IOM (2026, v1.0)","pdf_page":8,"figure":"Specifications - Mechanical Design Specifications table","method":"pdf text layer","printed_page":8},"rotation_from_coupling_end":"CCW","max_hp_3600":250,"max_hp_1800":125,"max_hp_1200":75,"thrust_bearing":"7314 BG","l3d4_solid":"1.5","max_suction_pressure":"100 psig / 689 kPa","dims":{"Seal chamber depth":{"in":3.68,"mm":93.6,"print":"3.68"},"Seal chamber bore":{"in":5.0,"mm":127.0,"print":"5.00"},"Shaft dia. in seal chamber":{"in":3.0,"mm":76.2,"print":"3.00"},"Bearing span C to C":{"in":18.97,"mm":482.0,"print":"18.97"},"Radial bearing C to impeller C":{"in":4.15,"mm":105.5,"print":"4.15"},"Shaft dia. at coupling":{"in":2.38,"mm":60.3,"print":"2.38"},"Shaft dia. between bearings":{"in":2.63,"mm":66.8,"print":"2.63"},"Shaft dia. at impeller":{"in":2.25,"mm":57.2,"print":"2.25"}}},"frame_conflicts":[],"links":{"product":{"url":"https://pumpresource.us/pumps/dean-pumps/ra-series/","label":"Dean RA Series Pumps","source":"Verified live on pumpresource.us (HTTP 200)"},"repair_kit":null,"impeller":null}}]}

{"side_paths":"\u003cpath d=\"M16554 12155 l-16 -24 -741 -3 c-612 -3 -748 -6 -777 -18 -28 -11\n-135 -15 -528 -20 l-494 -5 -19 -24 c-18 -22 -19 -43 -19 -350 l0 -328 26 -24\n26 -24 611 -3 c549 -2 613 -4 629 -19 10 -9 28 -21 40 -27 12 -6 26 -24 30\n-41 5 -16 9 -306 8 -644 -1 -621 3 -701 40 -911 36 -202 92 -395 154 -535 52\n-120 62 -164 45 -199 -8 -16 -30 -37 -49 -47 -32 -18 -68 -19 -547 -19 -500 0\n-514 -1 -533 -20 -20 -20 -20 -33 -20 -611 0 -385 -4 -597 -10 -610 -7 -12\n-11 -210 -11 -562 0 -448 -2 -548 -14 -563 -11 -16 -29 -20 -99 -23 -72 -2\n-92 0 -128 18 -77 38 -117 133 -119 280 0 95 -16 133 -59 148 -58 20 -128 16\n-162 -8 -57 -41 -62 -69 -60 -326 2 -220 -9 -470 -24 -527 -15 -63 -145 -103\n-277 -86 -92 11 -116 24 -155 82 l-27 42 -5 650 c-4 523 -8 656 -19 678 -8 15\n-32 40 -54 55 -32 22 -51 28 -93 27 -62 0 -87 -18 -116 -81 -18 -41 -19 -74\n-18 -655 1 -444 -2 -628 -11 -668 -24 -109 -90 -136 -329 -134 -197 2 -219 9\n-262 82 l-33 57 -1 345 c0 190 -1 483 -2 653 l-2 307 -41 45 c-41 44 -43 45\n-105 45 -55 0 -68 -4 -94 -27 -18 -17 -35 -44 -41 -68 -5 -23 -9 -269 -8 -575\n0 -621 0 -619 -71 -657 -44 -24 -50 -24 -260 -21 -167 2 -222 6 -245 18 -60\n31 -60 24 -63 605 -2 513 -7 606 -34 663 -18 38 -98 76 -143 68 -37 -7 -88\n-45 -107 -80 -9 -15 -13 -149 -15 -466 -3 -385 -5 -447 -19 -460 -14 -13 -17\n-13 -30 5 -13 17 -15 114 -14 695 l1 675 44 40 c40 37 43 45 50 105 12 115 1\n852 -13 877 -24 43 -45 46 -289 46 -156 0 -236 4 -242 11 -5 6 -11 24 -13 41\n-2 19 -9 31 -21 33 -33 6 -65 -7 -73 -31 -16 -53 -27 -57 -169 -57 -149 0\n-189 -10 -210 -51 -9 -16 -24 -33 -34 -38 -25 -14 -420 -14 -459 0 -17 6 -34\n19 -37 29 -14 43 -42 54 -157 61 -109 6 -112 7 -137 38 -28 33 -75 43 -99 19\n-19 -19 -15 -102 7 -129 17 -21 28 -24 117 -26 126 -2 161 -9 174 -33 15 -29\n13 -465 -2 -477 -7 -6 -65 -9 -128 -8 -118 2 -153 -6 -166 -34 -4 -9 -10 -71\n-13 -139 -7 -136 -10 -142 -73 -142 -28 0 -45 8 -74 35 -48 46 -86 55 -230 55\n-97 0 -124 3 -134 15 -10 12 -13 120 -11 501 1 266 4 491 7 499 10 25 45 29\n212 28 191 -2 182 -8 182 119 0 90 8 108 47 108 31 0 37 18 18 63 -8 20 -15\n52 -15 72 0 44 -27 72 -77 80 -69 11 -86 25 -109 95 l-21 65 -72 3 c-86 3 -94\n-7 -57 -71 33 -56 33 -84 1 -99 -25 -11 -28 -18 -39 -83 -2 -17 -23 -62 -45\n-100 -23 -38 -41 -82 -41 -97 0 -20 -8 -31 -30 -43 -60 -31 -61 -36 -63 -610\n-1 -286 -6 -526 -10 -532 -6 -10 -188 -13 -851 -13 l-843 0 -23 25 c-32 34\n-79 34 -108 0 -25 -29 23 -27 -551 -27 l-374 0 -24 26 c-32 35 -89 37 -102 2\n-5 -13 -18 -25 -28 -28 -10 -3 -291 -6 -624 -7 l-607 -3 -21 31 c-17 24 -30\n31 -54 31 -38 0 -50 -7 -66 -37 l-12 -23 -692 -1 c-380 -1 -753 -3 -827 -5\n-154 -3 -201 5 -215 38 -16 37 -69 37 -104 -1 l-29 -31 -119 -1 c-169 -1 -227\n-10 -259 -39 l-26 -25 -905 0 -905 0 -24 -28 c-13 -15 -24 -37 -24 -47 0 -26\n45 -163 69 -208 45 -89 45 -102 3 -193 -21 -46 -47 -117 -57 -157 -17 -70 -17\n-75 0 -120 10 -26 35 -79 56 -119 22 -40 39 -84 39 -98 0 -14 -18 -61 -39\n-104 -22 -43 -47 -106 -56 -139 -14 -57 -14 -67 1 -120 9 -31 31 -86 50 -122\n52 -101 52 -111 -1 -225 -26 -55 -51 -113 -56 -129 -13 -44 15 -156 62 -247\n46 -90 49 -133 10 -187 -11 -16 -35 -71 -52 -122 l-31 -93 17 -56 c10 -31 35\n-91 56 -135 38 -76 51 -147 30 -160 -16 -10 -67 -109 -85 -163 -16 -48 -16\n-56 -1 -115 9 -34 32 -97 52 -138 53 -113 53 -122 -2 -230 -72 -145 -71 -217\n8 -374 46 -93 45 -103 -12 -221 -77 -156 -76 -184 5 -350 24 -49 44 -102 44\n-117 0 -15 -17 -60 -38 -101 -79 -153 -81 -227 -8 -368 26 -48 46 -100 46\n-116 0 -15 -20 -68 -45 -116 -24 -49 -47 -108 -51 -132 -8 -57 16 -154 61\n-240 46 -88 46 -123 -4 -217 -66 -123 -74 -201 -31 -293 10 -22 30 -65 44 -96\n34 -73 33 -102 -9 -193 -68 -150 -78 -241 -34 -317 10 -19 37 -71 58 -116 42\n-87 60 -103 113 -103 48 0 74 23 97 86 55 145 90 171 116 84 4 -14 20 -52 35\n-85 30 -66 56 -85 115 -85 41 0 64 27 119 138 21 41 42 72 49 70 7 -2 32 -46\n57 -96 25 -51 52 -97 60 -102 18 -12 100 -13 117 -2 6 4 33 51 59 105 26 53\n52 97 58 97 17 -1 40 -37 76 -120 18 -41 38 -78 44 -82 6 -4 35 -8 63 -8 50 0\n54 2 76 38 12 20 38 68 56 105 23 49 38 67 49 65 18 -3 91 -131 92 -160 1 -46\n105 -65 154 -27 16 13 32 41 42 76 17 60 51 123 65 123 5 0 21 -19 36 -42 l28\n-42 3 -248 c2 -159 -1 -255 -8 -268 -9 -16 -23 -20 -87 -22 -70 -3 -78 -5 -97\n-31 -20 -27 -21 -40 -21 -265 0 -249 4 -284 32 -298 10 -5 270 -12 578 -16\n308 -3 583 -9 611 -13 31 -4 71 -2 105 7 44 10 177 12 704 6 358 -4 684 -7\n725 -7 122 2 799 3 875 1 212 -5 2153 14 2167 21 35 18 43 73 43 297 0 118 -3\n227 -8 243 -13 46 -42 67 -91 67 -27 0 -48 6 -56 15 -10 12 -12 89 -8 346 4\n277 7 333 20 345 13 13 58 16 281 17 175 1 270 -2 276 -8 13 -13 23 -640 12\n-683 -7 -25 -12 -27 -74 -32 -101 -8 -108 -18 -118 -177 -15 -240 5 -408 51\n-433 12 -6 262 -10 675 -10 734 0 713 -2 741 67 13 30 15 75 12 262 -4 268\n-10 290 -85 291 -21 0 -45 12 -75 36 -77 66 -67 65 -503 61 -378 -3 -396 -3\n-412 16 -16 17 -17 46 -15 299 1 154 5 284 8 290 15 24 69 30 262 29 143 -1\n208 2 218 10 17 14 19 78 2 84 -7 2 -116 6 -241 8 -125 2 -232 8 -237 13 -5 5\n-12 68 -16 139 -7 142 -16 165 -64 165 -15 0 -35 9 -45 20 -22 25 -60 26 -70\n3 -5 -10 -11 -87 -14 -171 -5 -120 -9 -155 -21 -162 -8 -5 -95 -10 -192 -10\n-221 0 -208 -11 -208 177 0 144 -8 183 -39 183 -33 0 -41 -32 -41 -172 0 -160\n-8 -182 -65 -186 -22 -2 -45 -8 -52 -14 -10 -8 -13 -87 -13 -339 l0 -329 -25\n-10 c-21 -8 -25 -16 -25 -54 0 -27 -7 -52 -17 -64 -18 -21 -25 -21 -661 -23\n-644 -3 -677 -1 -657 31 5 7 24 9 59 5 l52 -7 38 47 c25 30 35 50 29 56 -5 5\n-60 8 -124 7 l-114 -3 -5 -27 c-3 -14 -22 -45 -43 -67 -35 -38 -41 -41 -95\n-42 -375 -6 -632 -7 -655 -3 -37 8 -34 31 9 75 48 49 41 69 -22 69 -49 0 -45\n3 -138 -100 -16 -17 -40 -36 -53 -41 -33 -12 -1484 -12 -1517 1 -31 12 -32 28\n-6 81 12 22 18 44 15 49 -3 6 -23 10 -44 10 -42 0 -53 -10 -95 -82 -14 -26\n-35 -52 -46 -58 -30 -16 -1141 -14 -1164 3 -11 8 -19 33 -23 72 -4 33 -6 940\n-6 2015 1 1075 2 2153 2 2395 0 242 -2 960 -5 1596 l-4 1156 21 19 c18 16 40\n20 140 22 106 3 124 1 160 -17 41 -22 104 -28 114 -11 15 25 122 29 900 32\nl821 3 28 -23 c37 -28 85 -28 122 0 l28 23 607 0 c494 -1 610 -3 623 -14 14\n-12 16 -40 14 -230 l-3 -216 -39 0 c-59 0 -72 -29 -91 -209 -16 -152 -14 -178\n13 -208 20 -23 27 -23 52 4 17 19 20 35 20 124 0 56 5 126 11 156 6 29 13 63\n15 76 3 13 9 20 14 17 11 -7 14 -973 4 -1012 -4 -13 -10 -20 -15 -18 -12 8\n-20 73 -27 234 -6 116 -10 146 -23 154 -20 12 -65 2 -72 -17 -3 -7 0 -88 7\n-178 11 -139 16 -171 35 -201 24 -39 39 -48 69 -40 25 6 29 -17 36 -231 6\n-168 13 -188 63 -170 27 9 28 12 33 99 6 108 16 117 106 103 65 -10 84 0 84\n42 0 37 -14 46 -82 54 -32 4 -68 16 -80 26 l-23 18 0 615 c0 705 -8 650 93\n660 119 13 165 43 126 82 -18 17 -68 17 -159 0 -53 -10 -60 3 -63 122 -3 96\n-1 112 16 133 l19 24 443 -1 c436 0 444 0 460 -21 15 -18 18 -61 23 -326 4\n-196 10 -313 17 -326 16 -30 42 -21 62 20 16 31 18 69 18 332 l0 297 23 13\nc25 15 574 18 1285 9 l412 -6 35 -35 c19 -19 44 -43 55 -52 18 -16 20 -30 20\n-147 0 -104 3 -133 16 -145 20 -21 27 -20 50 5 17 19 19 39 21 185 1 118 5\n169 14 180 19 23 65 10 99 -26 17 -18 38 -30 54 -30 l26 0 0 -488 0 -488 -25\n-22 c-31 -27 -31 -33 -1 -69 l24 -28 3 -1728 c3 -1441 2 -1729 -9 -1736 -8 -5\n-32 -4 -54 2 -37 9 -41 8 -68 -22 -25 -26 -36 -31 -77 -31 -26 0 -58 -3 -71\n-6 -17 -5 -22 -2 -22 13 0 10 -12 35 -26 54 -22 29 -25 41 -20 84 3 28 2 88\n-2 134 -8 97 -25 120 -63 86 -21 -19 -21 -26 -17 -152 6 -146 0 -163 -55 -163\n-44 0 -57 34 -57 141 0 52 -3 135 -7 184 -7 81 -10 90 -29 93 -36 5 -46 -22\n-52 -139 -4 -92 -8 -115 -23 -128 -42 -35 -17 -88 85 -186 51 -49 59 -53 113\n-58 96 -9 115 -8 139 8 21 14 23 13 38 -25 12 -30 13 -46 5 -70 -10 -28 -8\n-36 25 -85 37 -57 74 -77 105 -58 25 16 44 82 43 150 -2 107 43 93 54 -17 4\n-38 17 -86 31 -116 l25 -51 -21 -48 c-20 -44 -20 -54 -10 -104 17 -78 22 -82\n93 -79 l61 3 -3 37 c-2 27 4 47 19 68 16 20 22 42 21 71 -1 26 8 65 27 107 16\n37 34 84 41 104 28 88 55 53 63 -82 7 -107 27 -170 67 -205 17 -16 36 -20 85\n-20 57 0 67 3 95 30 51 49 54 76 51 463 -1 195 1 388 5 429 6 67 11 80 40 113\n22 24 55 45 93 59 55 20 68 21 208 13 131 -8 154 -12 201 -36 88 -45 86 -33\n92 -521 6 -396 7 -423 27 -474 12 -30 29 -61 39 -68 25 -19 113 -16 154 5 69\n34 69 36 73 522 3 311 8 444 16 467 8 20 31 44 62 63 44 29 60 33 161 41 90 7\n116 6 133 -5 27 -18 45 -77 45 -147 0 -30 7 -99 15 -154 9 -55 22 -149 29\n-210 8 -60 19 -141 25 -180 6 -38 15 -115 21 -170 16 -144 31 -237 42 -258 7\n-14 19 -17 46 -15 l37 3 -3 94 c-2 52 -8 106 -13 120 -6 13 -19 106 -30 205\n-30 274 -46 396 -57 446 -18 78 -25 237 -12 245 7 4 30 -5 53 -22 71 -49 76\n-90 80 -573 3 -451 3 -455 67 -477 37 -13 121 -8 153 9 11 5 30 35 44 65 l26\n56 1 638 c1 630 1 638 22 666 11 15 40 39 64 52 40 23 52 24 234 25 183 1 193\n0 228 -22 24 -15 46 -41 62 -75 l25 -52 4 -625 c3 -606 4 -626 24 -671 26 -58\n75 -84 137 -75 56 9 84 30 107 79 17 40 19 75 19 617 1 316 5 610 9 654 8 76\n10 80 55 125 l46 46 148 3 c217 5 262 -1 321 -48 47 -37 48 -40 55 -107 4 -37\n7 -327 6 -643 0 -497 2 -582 15 -628 21 -70 42 -89 108 -97 62 -8 94 4 142 55\nl30 31 5 657 c6 725 1 680 73 742 l40 35 132 0 c129 0 132 -1 169 -28 20 -16\n42 -41 49 -55 7 -18 13 -148 18 -372 8 -445 16 -473 131 -489 120 -16 145 13\n160 183 14 152 38 212 98 242 63 31 219 44 243 20 15 -15 16 -66 16 -528 0\n-342 4 -515 11 -522 7 -7 10 -215 10 -637 0 -369 4 -638 9 -652 6 -14 20 -29\n33 -33 13 -4 265 -7 562 -6 558 1 557 2 604 -41 l22 -20 0 -571 c0 -439 3\n-577 13 -596 7 -14 27 -30 45 -36 21 -6 41 -24 55 -47 12 -20 38 -48 56 -62\nl35 -25 758 0 758 0 40 36 c22 20 48 50 59 68 11 17 38 42 59 54 65 36 72 62\n72 277 0 185 0 187 25 217 34 40 34 92 0 114 l-25 16 0 659 c0 547 2 661 14\n665 21 8 355 -168 464 -245 15 -10 44 -24 64 -30 69 -23 90 -93 44 -148 -13\n-15 -47 -73 -76 -128 -29 -55 -68 -122 -87 -148 -56 -79 -52 -82 119 -85 159\n-3 178 3 178 53 0 41 -11 55 -62 81 -57 29 -67 48 -45 83 51 80 91 179 95 232\nl4 57 -53 40 c-30 22 -83 54 -118 72 -36 18 -88 50 -117 71 -28 21 -108 65\n-176 97 -106 51 -173 91 -235 143 -10 7 -13 86 -13 329 0 305 1 320 19 330 11\n5 72 10 135 10 136 0 275 27 341 66 61 35 178 169 190 216 4 15 14 33 24 42\n18 16 108 33 246 46 50 5 111 13 137 19 27 6 59 7 76 2 32 -10 121 -74 137\n-100 6 -10 11 -242 13 -626 3 -552 5 -611 19 -623 13 -9 111 -12 409 -12 339\n0 393 2 404 15 10 12 14 140 16 568 2 466 5 561 18 612 14 55 16 310 14 2630\nl-3 2570 -34 0 c-31 0 -36 -4 -43 -32 -7 -26 -15 -33 -41 -37 -17 -3 -185 -7\n-372 -8 l-339 -3 -23 -34 -23 -34 0 -560 c0 -484 -2 -568 -16 -627 -23 -93\n-45 -118 -119 -136 -129 -30 -444 16 -482 71 -7 11 -34 52 -60 90 -73 112\n-106 140 -192 170 -114 39 -156 46 -268 44 -183 -4 -270 50 -312 192 -12 41\n-32 87 -43 103 -11 16 -24 43 -29 60 -4 17 -25 72 -46 121 -35 85 -38 96 -39\n200 0 78 -7 133 -22 187 -17 62 -19 89 -12 131 8 52 37 146 64 209 8 18 22 53\n32 78 11 24 54 92 97 150 44 57 84 114 89 125 6 11 22 33 36 50 26 31 70 122\n132 270 56 134 39 129 405 136 189 4 314 10 338 18 75 24 72 -6 72 657 0 567\n-1 593 -19 613 -33 37 -81 44 -318 47 -207 3 -232 5 -268 24 -23 12 -45 32\n-50 45 -5 14 -9 124 -7 244 2 203 3 221 22 241 51 56 31 55 670 60 632 5 618\n4 653 57 15 24 17 61 20 309 4 311 -2 358 -44 374 -15 6 -209 10 -464 10 -398\n0 -448 2 -540 20 -96 19 -142 20 -805 20 l-703 0 -30 25 c-40 33 -86 33 -108\n0z m-28 -169 c18 -13 19 -30 22 -261 4 -281 2 -288 -67 -299 -22 -3 -232 -5\n-468 -4 -500 2 -409 2 -1208 -2 -658 -3 -745 1 -745 29 -7 268 -4 505 6 519\n11 16 105 17 1201 22 653 3 1200 6 1214 8 14 1 34 -4 45 -12z m2615 -2 c11\n-14 14 -70 16 -269 0 -139 -3 -258 -8 -266 -7 -12 -83 -14 -446 -15 -241 -1\n-771 -4 -1178 -8 -407 -4 -764 -4 -793 -1 -83 10 -82 6 -81 248 1 250 6 297\n35 312 13 7 427 11 1231 13 1123 2 1211 1 1224 -14z m-1355 -666 c14 -14 15\n-23 5 -62 -7 -31 -11 -229 -11 -638 0 -326 -5 -638 -11 -693 -5 -55 -14 -143\n-18 -195 -5 -52 -21 -140 -36 -195 -15 -55 -31 -118 -37 -140 -5 -22 -16 -50\n-24 -62 -8 -12 -14 -29 -14 -36 0 -8 -17 -50 -39 -93 -21 -44 -48 -101 -60\n-129 -25 -58 -62 -114 -108 -167 -74 -86 -149 -215 -192 -333 -59 -166 -59\n-165 -76 -165 -9 0 -34 10 -57 21 -23 12 -105 39 -182 61 -134 38 -150 40\n-316 45 -256 7 -318 31 -376 146 -36 71 -107 140 -179 173 -55 25 -73 28 -220\n33 l-160 6 3 71 c3 62 0 80 -26 135 -95 208 -151 372 -177 524 -44 250 -45\n287 -44 942 1 567 -1 638 -16 683 -21 64 -12 78 58 82 29 2 557 3 1174 3 1036\n0 1124 -1 1139 -17z m611 -693 c45 -10 47 -36 49 -592 2 -459 0 -524 -13 -535\n-20 -16 -590 -25 -613 -9 -13 9 -12 18 3 75 9 35 17 82 17 103 0 21 9 106 20\n188 16 121 20 208 20 452 0 166 3 309 6 318 6 15 28 16 248 10 133 -3 251 -8\n263 -10z m-9419 -1111 c26 -18 29 -49 6 -58 -26 -10 -152 -7 -159 4 -11 17 6\n51 28 60 35 14 101 11 125 -6z m1416 -640 c23 -9 20 -71 -8 -156 -47 -143 -94\n-293 -100 -320 -7 -30 -40 -45 -61 -28 -12 10 -15 54 -15 244 0 127 4 236 8\n242 12 19 139 32 176 18z m639 -11 c4 -2 7 -184 7 -404 l0 -399 -27 -11 c-29\n-12 -428 -15 -463 -4 -28 9 -33 30 -39 158 -7 133 -11 140 -83 152 -21 4 -42\n14 -45 22 -7 17 15 91 53 183 24 61 64 197 64 220 0 29 49 89 77 93 33 6 445\n-3 456 -10z m3891 -79 c9 -8 16 -21 16 -27 5 -1514 1 -3457 -8 -3479 -7 -17\n-23 -30 -46 -38 -28 -9 -36 -17 -36 -36 0 -25 4 -28 51 -38 15 -3 30 -14 34\n-23 4 -10 9 -800 12 -1755 l4 -1737 -26 -17 c-23 -15 -47 -16 -218 -11 -164 6\n-194 9 -204 24 -10 13 -13 752 -12 3542 0 1939 3 3542 7 3561 l8 35 169 5 c94\n3 184 7 202 8 18 1 38 -5 47 -14z m1095 -22 c66 -33 79 -45 117 -102 56 -86\n102 -138 134 -155 78 -41 146 -54 315 -60 94 -4 188 -11 210 -17 22 -5 65 -16\n95 -23 184 -43 253 -85 299 -182 l33 -68 -10 -160 c-7 -95 -11 -554 -10 -1123\n0 -703 -3 -966 -11 -976 -8 -9 -45 -15 -119 -18 -122 -6 -168 6 -176 44 -2 13\n-9 50 -15 82 -21 117 -41 126 -286 123 -189 -3 -211 -9 -254 -68 -18 -24 -26\n-51 -30 -98 -6 -65 -6 -65 -41 -73 -19 -4 -141 -8 -270 -9 -227 -1 -236 -2\n-275 -24 -22 -13 -50 -37 -63 -54 -31 -43 -52 -157 -53 -299 -1 -65 -4 -146\n-8 -182 l-6 -65 -40 -5 c-50 -7 -65 -16 -65 -40 0 -23 28 -40 64 -40 59 0 56\n114 56 -1780 1 -1562 -1 -1735 -15 -1749 -13 -13 -53 -17 -241 -19 -264 -5\n-286 -2 -303 36 -16 34 -16 3481 -1 3496 5 5 28 12 51 15 52 7 79 40 54 65 -9\n9 -33 16 -54 16 -23 0 -44 6 -51 16 -11 12 -13 342 -11 1745 1 1005 6 1740 11\n1754 5 13 19 25 32 28 13 2 212 5 443 5 l420 1 74 -37z m-5943 11 c7 -3 18\n-21 23 -42 10 -40 8 -252 -3 -270 -10 -16 -488 -15 -504 1 -8 8 -12 54 -12\n143 0 137 6 159 45 168 29 6 434 7 451 0z m-20 -423 c15 -6 43 -27 62 -48 20\n-20 49 -42 66 -47 29 -10 31 -14 29 -55 0 -25 -13 -81 -28 -125 -32 -97 -91\n-298 -100 -342 -3 -17 -12 -37 -20 -43 -7 -6 -16 -28 -20 -49 -3 -20 -17 -66\n-29 -102 -20 -55 -30 -68 -66 -89 -64 -37 -81 -66 -92 -156 -5 -44 -18 -128\n-28 -189 -11 -60 -22 -129 -25 -151 -7 -45 -20 -61 -74 -97 -28 -18 -37 -33\n-51 -85 -10 -35 -29 -75 -43 -90 -24 -26 -28 -36 -41 -94 -4 -16 -13 -28 -21\n-28 -36 0 -39 36 -43 440 l-3 395 -28 55 c-47 92 -110 110 -194 54 -57 -38\n-64 -64 -70 -283 -4 -159 -8 -196 -21 -209 -14 -14 -18 -15 -31 -1 -13 12 -15\n78 -15 454 -1 434 -1 440 20 455 66 47 62 40 72 156 11 141 13 149 41 161 13\n6 70 14 126 18 98 7 102 9 127 39 15 17 34 36 43 41 33 20 410 32 457 15z\nm9594 -70 c13 -8 15 -188 18 -1501 2 -1062 0 -1495 -8 -1503 -10 -10 -230 -18\n-532 -20 -127 -1 -113 -192 -116 1520 -2 1118 0 1489 9 1500 9 11 66 14 313\n14 172 0 307 -4 316 -10z m-9245 -40 c4 -6 12 -65 20 -133 7 -67 16 -130 20\n-139 4 -9 22 -26 41 -37 l33 -20 -2 -692 c-1 -505 -5 -693 -13 -696 -7 -2 -19\n3 -28 12 -14 15 -16 64 -16 450 0 254 -4 444 -10 459 -5 14 -28 39 -51 56 -52\n37 -115 41 -159 10 -39 -28 -71 -99 -72 -157 0 -26 0 -203 1 -392 1 -338 -4\n-387 -32 -379 -7 3 -19 17 -27 34 -8 16 -23 40 -33 54 -11 16 -17 43 -17 81 0\n67 -19 96 -79 124 -25 11 -41 25 -41 35 0 9 32 77 70 151 64 122 113 226 127\n271 3 10 -6 30 -21 49 -33 38 -33 68 -1 165 14 42 25 84 25 93 0 9 6 26 14 37\n8 11 17 38 21 60 8 46 39 155 59 204 8 19 26 73 40 120 30 93 55 158 69 178\n11 15 53 16 62 2z m-10017 -307 c2 -19 -7 -51 -23 -82 -32 -64 -56 -67 -85\n-12 -11 22 -24 42 -30 46 -14 9 -13 58 2 73 8 8 35 12 73 10 59 -3 60 -3 63\n-35z m343 27 c26 -14 24 -41 -8 -103 -45 -87 -55 -85 -102 19 -28 63 -32 77\n-20 85 19 12 106 11 130 -1z m373 -13 c9 -14 5 -29 -19 -73 -16 -31 -36 -60\n-43 -66 -20 -17 -40 9 -59 76 -16 57 -16 59 3 73 27 19 104 13 118 -10z m359\n2 c8 -13 3 -31 -19 -75 -41 -84 -60 -83 -103 3 -31 64 -32 68 -14 80 26 19\n123 13 136 -8z m355 -5 c4 -30 -50 -138 -71 -142 -18 -4 -52 61 -64 122 -8 37\n9 47 77 44 47 -3 55 -6 58 -24z m9105 -17 c16 -11 17 -63 17 -731 0 -653 -2\n-721 -17 -738 -14 -16 -33 -18 -140 -18 -68 0 -133 5 -143 10 -19 10 -19 34\n-20 740 0 683 1 730 18 739 26 15 264 14 285 -2z m-1848 -204 c0 -170 -4 -207\n-22 -189 -5 4 -10 91 -11 193 -4 175 -3 185 15 181 17 -3 18 -16 18 -185z\nm-8165 31 c16 -35 30 -73 30 -83 0 -30 -58 -151 -75 -157 -20 -8 -50 29 -75\n95 -20 52 -20 55 -3 100 10 25 28 65 41 89 29 52 39 47 82 -44z m687 59 c10\n-16 29 -54 42 -86 l23 -58 -23 -54 c-13 -30 -34 -67 -46 -82 -21 -28 -22 -28\n-37 -8 -27 35 -59 109 -58 135 1 62 48 180 72 180 5 0 17 -12 27 -27z m-1065\n-26 c14 -23 33 -59 42 -80 15 -38 15 -39 -24 -123 -22 -46 -44 -84 -50 -84\n-10 0 -51 78 -69 133 -17 51 -6 106 31 156 16 23 33 41 36 41 4 0 19 -19 34\n-43z m713 10 c14 -19 32 -56 40 -83 14 -46 13 -51 -12 -114 -14 -37 -33 -77\n-43 -90 l-18 -24 -42 84 c-38 76 -41 87 -31 115 6 17 11 37 11 44 0 17 50 101\n60 101 5 0 20 -15 35 -33z m711 2 c8 -17 22 -56 30 -86 16 -62 6 -126 -28\n-168 -27 -35 -50 -20 -89 57 -30 59 -30 63 -15 89 9 15 16 32 16 39 0 17 50\n100 61 100 5 0 16 -14 25 -31z m15404 -206 c19 -39 48 -98 63 -132 42 -89 68\n-116 145 -145 57 -22 91 -27 222 -32 129 -6 163 -11 206 -30 70 -31 167 -123\n205 -195 34 -64 52 -78 131 -110 54 -22 105 -30 305 -49 108 -10 113 -9 183\n16 57 20 74 23 86 13 13 -11 15 -117 12 -835 -2 -452 -7 -826 -11 -831 -5 -4\n-104 -8 -221 -8 -218 0 -246 -5 -246 -41 0 -30 43 -36 252 -39 119 -1 213 -6\n219 -12 6 -6 8 -305 7 -832 -3 -698 -5 -823 -17 -831 -9 -5 -31 -2 -61 10 -25\n10 -66 21 -91 25 -61 9 -253 -11 -366 -39 -83 -20 -97 -26 -136 -66 -24 -25\n-49 -56 -56 -69 -39 -72 -130 -163 -186 -185 -11 -5 -92 -12 -180 -16 -88 -4\n-167 -11 -176 -14 -10 -4 -23 0 -33 9 -15 15 -16 102 -17 948 -1 513 -1 1076\n0 1252 2 376 -1 394 -69 468 l-47 52 -71 2 c-124 3 -110 -110 -109 908 0 630\n4 885 11 882 6 -1 27 -35 46 -74z m-16990 -115 c34 -71 38 -124 14 -171 -29\n-56 -54 -86 -68 -81 -8 3 -28 33 -46 66 -38 70 -37 100 3 191 36 79 58 78 97\n-5z m713 -6 c43 -97 43 -111 1 -186 -25 -46 -42 -66 -53 -64 -9 2 -31 32 -49\n68 -37 73 -37 96 3 181 39 86 60 86 98 1z m360 8 c37 -68 36 -127 -2 -200 -19\n-36 -36 -55 -47 -55 -24 0 -82 108 -83 155 -1 36 39 126 66 147 22 17 35 8 66\n-47z m352 5 c41 -92 42 -124 7 -199 -17 -37 -37 -66 -45 -66 -34 0 -87 100\n-87 164 0 35 8 59 35 101 20 30 42 55 51 55 9 0 25 -23 39 -55z m-1075 -2 c24\n-38 30 -58 30 -102 -1 -83 -46 -170 -81 -156 -8 3 -27 30 -43 61 -42 80 -36\n129 28 232 14 23 37 12 66 -35z m8354 -100 c3 -42 6 -147 6 -235 0 -127 -3\n-158 -14 -158 -20 0 -26 47 -26 220 0 161 7 250 20 250 4 0 10 -34 14 -77z\nm334 45 c24 -29 30 -161 31 -678 4 -2327 0 -3720 -10 -3744 -14 -30 -34 -39\n-59 -26 -25 13 -35 44 -36 110 -4 315 -2 4281 3 4300 8 34 22 50 43 50 10 0\n22 -6 28 -12z m954 -44 c12 -45 8 -2107 -4 -2121 -13 -17 -75 -17 -84 -1 -10\n15 -18 2058 -9 2106 3 18 15 42 26 53 18 18 23 19 42 6 11 -7 25 -27 29 -43z\nm927 37 c12 -22 19 -2139 8 -2159 -9 -13 -65 -16 -83 -4 -14 8 -14 2149 -1\n2170 13 19 65 15 76 -7z m951 -701 c3 -393 3 -886 0 -1095 l-5 -380 -39 2\nc-22 2 -44 7 -50 13 -6 6 -9 400 -8 1082 0 590 1 1079 1 1086 1 9 15 12 49 10\nl47 -3 5 -715z m922 685 c4 -16 9 -504 9 -1084 1 -1126 4 -1071 -46 -1071 -53\n0 -50 -65 -50 1087 0 587 3 1076 7 1086 6 13 16 17 40 15 26 -2 33 -9 40 -33z\nm-11929 -173 c32 -35 67 -117 67 -155 0 -25 -11 -60 -31 -95 -46 -84 -56 -87\n-88 -24 -10 20 -26 52 -36 70 -11 22 -15 44 -11 65 8 41 62 157 74 157 5 0 16\n-8 25 -18z m726 -16 c15 -15 26 -47 34 -89 9 -56 8 -74 -6 -120 -21 -68 -49\n-96 -73 -76 -24 19 -64 108 -64 141 0 53 55 168 80 168 3 0 17 -11 29 -24z\nm-1401 -56 c38 -75 37 -101 -6 -184 -38 -71 -60 -72 -95 -3 -35 69 -35 128 -2\n202 34 77 57 74 103 -15z m354 10 c36 -69 35 -102 -2 -185 -25 -56 -33 -66\n-52 -63 -31 4 -78 97 -78 152 0 39 28 114 52 143 22 27 51 10 80 -47z m695 48\nc18 -30 53 -125 53 -147 0 -37 -69 -151 -92 -151 -13 0 -78 140 -78 168 0 13\n12 44 27 70 37 65 43 72 64 72 10 0 21 -6 26 -12z m-527 -323 c48 -83 49 -119\n9 -204 -22 -47 -39 -71 -51 -71 -18 0 -88 128 -88 162 0 18 52 130 72 156 17\n20 25 14 58 -43z m-719 3 c41 -80 47 -108 33 -153 -18 -58 -54 -135 -63 -135\n-21 0 -101 138 -101 173 0 34 80 157 102 157 4 0 17 -19 29 -42z m370 -34 l39\n-71 -16 -47 c-26 -77 -63 -136 -80 -129 -17 6 -84 133 -84 158 0 21 60 148 74\n157 19 13 27 4 67 -68z m714 10 c30 -53 36 -73 32 -101 -8 -47 -61 -148 -78\n-148 -20 0 -77 89 -85 131 -10 53 47 184 80 184 8 0 31 -30 51 -66z m339 34\nc50 -67 55 -143 13 -241 -28 -68 -52 -62 -94 22 -35 69 -40 104 -21 148 20 46\n58 103 68 103 5 0 20 -15 34 -32z m7447 -95 c3 -34 7 -394 7 -801 2 -662 0\n-742 -14 -756 -11 -11 -35 -16 -83 -16 -72 0 -84 6 -94 50 -3 14 -7 364 -8\n778 -3 749 -3 753 18 773 24 25 73 38 128 36 l40 -2 6 -62z m4703 13 c19 -38\n20 -69 19 -795 -1 -712 -2 -756 -19 -768 -22 -16 -70 -17 -80 -2 -4 7 -6 360\n-6 786 1 698 2 777 17 799 22 34 46 27 69 -20z m-3980 -62 c21 -20 20 -30 -4\n-54 -18 -18 -31 -20 -93 -18 -65 3 -72 5 -75 25 -2 12 2 31 8 42 9 18 20 21\n80 21 49 0 73 -4 84 -16z m-9402 -194 c20 -41 37 -82 37 -91 1 -25 -58 -136\n-76 -143 -22 -9 -40 9 -70 68 -29 57 -27 94 10 172 44 96 49 96 99 -6z m353\n10 c19 -38 35 -82 35 -96 0 -33 -42 -123 -68 -147 -19 -18 -20 -17 -40 10 -10\n15 -30 48 -42 73 -20 39 -21 48 -10 80 27 79 64 150 76 150 8 0 30 -31 49 -70z\nm359 -2 c49 -104 49 -102 16 -167 -53 -104 -74 -105 -122 -7 -30 62 -31 68\n-19 102 31 85 62 144 76 144 8 0 29 -31 49 -72z m359 -4 c21 -38 39 -80 39\n-94 0 -14 -13 -47 -29 -75 -24 -42 -34 -50 -58 -50 -22 0 -35 8 -52 34 -13 19\n-26 46 -30 59 -10 41 57 207 80 199 7 -2 29 -35 50 -73z m343 32 c43 -75 35\n-205 -14 -250 -27 -24 -49 -11 -79 47 -29 59 -28 100 8 174 40 86 51 90 85 29z\nm12162 -170 c36 -18 71 -25 151 -30 57 -3 107 -8 111 -11 4 -3 8 -258 9 -568\n2 -471 -1 -566 -12 -575 -21 -18 -313 -4 -329 16 -9 11 -12 154 -10 594 1 319\n4 584 7 589 9 14 21 11 73 -15z m-4501 -103 c24 -16 49 -18 213 -16 151 2 196\n6 245 22 55 18 61 18 73 3 18 -23 18 -1065 -1 -1080 -7 -6 -109 -12 -262 -14\n-138 -2 -258 -8 -268 -12 -27 -13 -41 -44 -26 -62 9 -11 58 -14 274 -14 324 0\n300 13 300 -164 0 -498 -7 -933 -15 -946 -8 -12 -17 -11 -65 13 -54 26 -60 27\n-230 27 -167 0 -177 -1 -241 -27 -64 -27 -66 -27 -80 -9 -11 16 -14 207 -13\n1154 0 776 3 1140 10 1148 12 14 41 7 86 -23z m1461 28 c11 -6 14 -108 17\n-504 2 -273 7 -515 10 -539 5 -31 3 -47 -7 -55 -7 -6 -71 -12 -143 -14 -130\n-4 -130 -4 -140 20 -5 14 -21 48 -35 75 l-25 51 -62 5 c-34 3 -65 9 -70 13 -4\n5 -9 63 -10 129 -2 132 -14 168 -57 168 -37 0 -46 -37 -45 -183 0 -170 9 -197\n69 -216 88 -27 93 -30 79 -47 -9 -11 -31 -14 -103 -12 l-90 3 -8 35 c-10 49\n-8 1045 3 1061 6 11 13 11 26 3 16 -10 19 -31 23 -158 4 -131 7 -149 24 -162\n11 -8 27 -14 36 -14 34 0 40 22 40 150 0 69 4 131 8 138 14 21 72 32 174 32\n127 0 138 -9 138 -112 1 -133 7 -169 29 -191 l21 -21 23 22 c20 21 22 33 25\n165 4 155 13 182 50 158z m-10721 -63 c36 -69 39 -114 12 -179 -45 -108 -69\n-109 -112 -5 -33 81 -33 91 -4 155 45 97 66 102 104 29z m712 -3 c21 -36 31\n-68 31 -96 0 -49 -54 -173 -73 -166 -19 6 -76 115 -83 157 -5 30 -1 48 22 86\n53 93 60 95 103 19z m360 -7 c38 -76 39 -122 5 -191 -30 -59 -41 -69 -64 -57\n-17 9 -70 129 -70 158 1 15 40 102 63 140 16 25 36 10 66 -50z m367 5 c31 -54\n29 -99 -9 -188 -35 -80 -52 -79 -94 5 -18 35 -33 73 -33 83 0 10 13 46 30 82\n42 89 62 93 106 18z m-1079 2 c32 -57 31 -124 -4 -197 -16 -32 -33 -58 -40\n-58 -23 0 -43 32 -64 100 -23 76 -19 102 21 168 27 45 57 40 87 -13z m11273\n-224 c0 -28 -15 -42 -66 -58 -103 -32 -329 -34 -430 -2 -42 13 -81 54 -62 65\n7 5 114 8 238 6 124 -1 241 1 260 6 42 10 60 5 60 -17z m-11446 -73 c20 -38\n36 -80 36 -92 0 -11 -11 -43 -25 -70 -14 -27 -25 -57 -25 -66 0 -22 -38 -56\n-49 -44 -17 18 -71 153 -71 177 0 39 68 177 84 171 7 -3 30 -37 50 -76z m679\n54 c34 -37 70 -132 64 -169 -8 -44 -68 -148 -87 -148 -13 0 -80 144 -80 172 0\n18 70 163 79 163 4 0 15 -8 24 -18z m-356 -14 c12 -13 33 -47 48 -76 27 -52\n27 -53 11 -95 -48 -120 -87 -167 -102 -120 -3 10 -19 48 -35 86 -16 37 -29 74\n-29 83 0 25 66 144 81 144 3 0 15 -10 26 -22z m741 -28 c45 -69 49 -98 21\n-167 -25 -63 -56 -113 -68 -113 -10 0 -54 87 -72 141 -10 30 -9 44 5 87 19 55\n50 102 69 102 7 0 27 -22 45 -50z m374 -60 c15 -45 15 -56 1 -107 -19 -74 -40\n-113 -59 -113 -9 0 -30 33 -55 87 l-40 87 17 46 c9 25 28 60 42 79 l26 34 26\n-31 c14 -17 33 -54 42 -82z m14661 59 c30 -16 37 -28 37 -70 0 -55 -25 -72\n-95 -64 -44 6 -60 13 -72 31 -16 26 -12 76 8 101 14 16 92 17 122 2z m-4613\n-413 c0 -237 -3 -325 -12 -334 -7 -7 -28 -12 -47 -12 -42 0 -79 -17 -95 -43\n-15 -23 2 -34 69 -42 94 -12 85 26 85 -351 0 -289 -2 -335 -15 -340 -8 -4 -44\n2 -79 11 -53 14 -95 16 -257 13 -125 -3 -206 -10 -228 -18 -58 -22 -59 -17\n-60 330 -1 298 -1 310 19 330 14 14 33 20 63 20 50 0 81 18 75 45 -4 26 -44\n45 -95 45 -32 0 -45 5 -53 21 -7 11 -9 27 -6 34 3 8 1 98 -5 202 -5 103 -6\n238 -2 298 l8 110 28 3 c16 2 47 -3 70 -11 56 -19 411 -7 472 16 27 10 44 11\n53 5 9 -8 12 -87 12 -332z m1709 331 c17 -21 9 -640 -8 -661 -12 -14 -44 -16\n-230 -16 -155 0 -220 3 -229 12 -9 9 -12 97 -12 335 0 367 -4 350 81 320 26\n-10 87 -20 135 -23 79 -5 97 -2 159 20 81 30 89 31 104 13z m-1319 -14 c70\n-26 373 -25 454 1 97 32 92 50 87 -325 -2 -178 -5 -327 -8 -331 -2 -5 -87 -8\n-188 -8 -186 0 -228 -7 -240 -38 -3 -9 1 -23 10 -31 13 -13 50 -17 210 -19\n186 -3 196 -5 206 -24 13 -25 14 -657 1 -670 -5 -5 -24 -2 -43 6 -62 25 -195\n35 -354 27 -86 -5 -162 -14 -178 -21 -22 -11 -30 -11 -40 -1 -9 9 -12 177 -14\n719 -1 389 0 713 2 720 6 17 41 15 95 -5z m-11339 -223 c16 -39 29 -80 29 -90\n0 -23 -49 -140 -67 -160 -11 -12 -15 -12 -28 5 -22 28 -75 139 -75 156 0 22\n67 161 81 170 19 12 28 0 60 -81z m16356 73 c11 -10 31 -46 43 -81 22 -59 23\n-74 17 -220 -3 -86 -9 -164 -12 -173 -3 -9 -20 -19 -36 -23 -16 -3 -406 -6\n-866 -6 -749 -1 -838 1 -852 15 -13 13 -17 50 -19 214 -4 228 4 264 62 280 17\n4 394 9 837 10 763 2 807 1 826 -16z m-17078 -60 c47 -100 47 -103 5 -188 -21\n-42 -41 -78 -45 -81 -9 -5 -44 43 -54 76 -4 14 -14 34 -21 45 -8 11 -14 31\n-14 45 1 43 67 170 90 170 4 0 22 -30 39 -67z m349 15 c47 -84 49 -117 11\n-199 -43 -92 -61 -92 -104 4 -14 32 -25 67 -25 78 0 43 64 169 86 169 1 0 15\n-24 32 -52z m1079 -14 c48 -88 50 -111 15 -181 -39 -76 -54 -89 -74 -65 -9 9\n-19 28 -23 42 -4 14 -16 36 -26 49 -34 43 -22 105 38 199 8 13 20 22 26 20 7\n-3 26 -31 44 -64z m-357 10 c41 -65 48 -121 21 -170 -12 -22 -28 -56 -36 -77\n-13 -33 -17 -37 -34 -27 -11 5 -34 39 -52 75 -24 50 -30 73 -26 100 8 46 64\n145 83 145 8 0 28 -21 44 -46z m-918 -261 c32 -38 59 -98 61 -132 1 -37 -43\n-140 -69 -161 -19 -17 -29 -7 -59 56 -37 78 -36 125 4 197 18 31 36 57 40 57\n4 0 15 -8 23 -17z m1075 9 c21 -13 63 -116 62 -152 0 -42 -57 -153 -81 -158\n-12 -2 -26 14 -47 55 -45 91 -48 124 -16 180 30 51 54 83 64 83 3 0 11 -4 18\n-8z m-676 -67 c29 -60 31 -69 20 -103 -17 -57 -64 -137 -80 -137 -8 0 -30 25\n-48 55 -40 66 -43 121 -12 183 30 58 38 67 65 67 18 0 29 -13 55 -65z m348 10\nc20 -35 31 -68 31 -92 -1 -44 -57 -156 -80 -161 -20 -3 -76 90 -85 140 -6 30\n-1 47 30 102 46 83 63 85 104 11z m705 11 c38 -78 29 -183 -21 -238 -27 -30\n-43 -20 -73 45 -38 78 -37 99 1 176 37 75 63 79 93 17z m10260 -243 c12 -29 7\n-2152 -4 -2173 -13 -24 -62 -27 -79 -6 -18 21 -19 2130 -1 2151 12 14 56 41\n71 44 4 1 10 -7 13 -16z m-11145 -65 c32 -66 33 -74 23 -114 -18 -66 -56 -139\n-72 -139 -18 0 -79 119 -79 155 -1 28 38 130 58 154 23 28 36 18 70 -56z m354\n0 c21 -40 37 -82 37 -93 0 -24 -67 -165 -79 -165 -20 0 -67 84 -84 151 -10 39\n56 179 83 179 4 0 23 -33 43 -72z m18198 53 c18 -14 22 -30 26 -92 2 -41 0\n-80 -6 -88 -6 -9 -36 -18 -77 -22 -64 -6 -94 -23 -94 -51 0 -22 42 -46 94 -52\n43 -6 60 -13 71 -30 22 -33 16 -2673 -6 -2687 -8 -4 -145 -8 -305 -8 -231 0\n-295 3 -310 14 -18 13 -19 59 -22 1496 -2 1609 -5 1522 50 1531 13 2 143 5\n290 5 242 2 269 0 289 -16z m-18916 -52 c37 -77 36 -130 -3 -202 -31 -57 -50\n-65 -68 -27 -37 78 -54 123 -54 141 0 19 42 111 62 137 19 23 34 12 63 -49z\nm9934 45 c11 -4 12 -31 7 -157 -6 -142 -5 -154 14 -185 11 -18 32 -38 47 -44\n16 -7 30 -13 32 -15 2 -1 6 -29 8 -60 2 -32 10 -92 18 -133 8 -41 17 -106 21\n-145 3 -38 12 -104 20 -145 12 -65 19 -168 12 -171 -2 0 -64 -4 -139 -8 -116\n-6 -141 -10 -172 -30 -71 -44 -68 -71 -66 516 2 291 6 538 11 551 4 12 18 26\n30 31 22 8 127 5 157 -5z m429 -8 c14 -14 19 -185 22 -736 2 -391 4 -356 -15\n-364 -22 -8 -142 49 -149 71 -3 10 -10 65 -16 123 -6 57 -13 107 -15 111 -8\n12 -35 299 -35 365 0 50 5 75 21 101 15 24 20 44 16 71 -8 60 -33 155 -46 180\n-20 38 -10 85 19 93 37 10 183 -2 198 -15z m2643 5 c23 -18 23 -20 24 -339 1\n-176 -1 -326 -5 -333 -5 -7 -18 -9 -31 -6 -13 3 -53 13 -88 22 -53 13 -81 14\n-172 6 -60 -6 -118 -15 -128 -21 -11 -5 -29 -10 -40 -10 -21 0 -21 4 -23 298\n-1 163 -2 313 -1 331 1 62 14 66 241 68 181 2 203 0 223 -16z m656 -11 c10\n-20 13 -141 12 -557 -1 -467 -3 -534 -17 -545 -9 -8 -55 -15 -111 -18 -65 -4\n-112 -13 -147 -27 -32 -14 -56 -18 -65 -13 -12 8 -14 96 -12 579 1 314 5 575\n8 581 14 23 54 29 185 27 132 -2 135 -2 147 -27z m-14009 -48 l34 -63 -28 -81\nc-16 -45 -35 -87 -42 -95 -22 -22 -46 7 -78 94 l-27 75 22 46 c54 113 70 116\n119 24z m1430 3 c18 -45 23 -71 19 -106 -7 -57 -47 -144 -67 -144 -19 0 -81\n111 -87 158 -4 29 0 49 17 80 54 98 82 101 118 12z m7406 44 l26 -20 0 -853\nc0 -699 -2 -855 -13 -871 -12 -15 -23 -17 -76 -12 -34 3 -73 12 -86 21 -23 15\n-24 21 -27 143 -2 71 -1 456 2 856 5 707 6 729 24 743 31 22 118 18 150 -7z\nm2072 7 c19 -14 19 -37 19 -1063 0 -995 -1 -1050 -18 -1076 -24 -36 -45 -44\n-65 -23 -15 15 -17 104 -18 1079 0 594 3 1070 8 1080 11 21 47 22 74 3z m1886\n-41 c10 -67 1 -2029 -9 -2080 -7 -33 -13 -41 -35 -43 -55 -6 -53 -46 -53 1101\n0 1162 -5 1080 60 1075 28 -3 30 -7 37 -53z m766 47 c19 -13 22 -1503 3 -1549\n-16 -40 -46 -51 -72 -27 -18 17 -19 39 -19 794 0 427 3 780 7 783 9 10 65 8\n81 -1z m3548 -6 c19 -14 19 -51 22 -2358 1 -1289 0 -2357 -3 -2374 -4 -23 -14\n-35 -36 -44 -17 -7 -48 -37 -70 -66 -22 -29 -49 -59 -60 -65 -16 -8 -226 -12\n-741 -13 l-720 -1 -17 24 c-25 36 -65 74 -102 96 l-34 20 -3 2365 c-1 1301 0\n2375 3 2388 3 13 16 27 28 32 12 5 396 9 868 9 715 1 848 -1 865 -13z m-7122\n-12 c3 -9 6 -485 6 -1058 0 -819 -3 -1046 -12 -1058 -21 -25 -45 -28 -68 -10\nl-22 18 -2 1034 c-2 569 -1 1047 2 1063 4 24 8 27 47 27 30 0 45 -5 49 -16z\nm-9444 -345 c32 -70 32 -70 15 -114 -21 -57 -57 -109 -76 -113 -18 -3 -89 112\n-89 145 0 20 61 161 77 176 12 13 40 -23 73 -94z m697 33 c9 -26 25 -62 35\n-80 11 -23 14 -41 8 -55 -15 -40 -75 -140 -85 -144 -6 -2 -28 35 -49 82 l-39\n86 32 68 c17 37 31 72 31 77 0 6 5 15 12 22 17 17 33 0 55 -56z m-1064 -22\nc41 -82 41 -87 4 -173 -28 -67 -40 -82 -59 -74 -19 7 -78 128 -78 159 0 34 67\n170 83 166 6 -2 29 -37 50 -78z m712 7 c19 -41 35 -86 35 -101 0 -34 -68 -166\n-85 -166 -22 0 -70 120 -70 175 0 59 45 165 70 165 9 0 29 -28 50 -73z m705\n21 c43 -98 38 -189 -14 -253 -24 -30 -25 -30 -40 -10 -36 46 -68 127 -62 159\n9 49 64 156 79 156 8 0 25 -24 37 -52z m-889 -305 c44 -95 47 -132 15 -179\n-14 -21 -26 -44 -26 -50 0 -18 -26 -35 -43 -28 -24 9 -79 131 -72 157 25 88\n67 167 87 167 5 0 23 -30 39 -67z m-709 -2 c35 -67 36 -122 3 -196 -26 -59\n-46 -75 -70 -55 -24 20 -65 109 -65 140 0 26 41 130 63 158 18 23 40 8 69 -47z\nm350 5 c41 -83 44 -131 11 -191 -39 -69 -63 -71 -102 -8 -37 58 -39 96 -9 166\n24 57 45 87 62 87 7 0 24 -24 38 -54z m713 7 c15 -27 33 -69 40 -95 13 -46 12\n-48 -23 -107 -51 -86 -76 -80 -121 26 -23 57 -22 75 12 153 38 86 54 90 92 23z\nm363 -1 c36 -82 38 -138 9 -205 -34 -76 -48 -76 -105 2 -19 26 -32 57 -32 74\n0 27 42 136 63 165 20 26 44 12 65 -36z m-1242 -320 c36 -67 42 -113 21 -148\n-37 -64 -69 -105 -80 -101 -21 6 -70 120 -70 162 0 49 57 158 80 153 9 -2 31\n-32 49 -66z m326 51 c65 -77 73 -143 27 -233 -41 -81 -60 -81 -99 3 -36 74\n-37 108 -9 173 35 79 52 91 81 57z m714 9 c6 -4 25 -37 43 -74 36 -72 36 -107\n1 -158 -9 -14 -25 -37 -34 -52 -9 -16 -23 -28 -31 -28 -22 0 -75 112 -75 159\n0 38 9 66 43 129 17 32 32 39 53 24z m-321 -68 c42 -77 41 -99 -7 -179 -28\n-46 -45 -64 -58 -65 -15 0 -70 129 -70 163 0 41 22 101 47 129 29 33 49 22 88\n-48z m689 51 c19 -19 39 -89 39 -132 -1 -48 -32 -132 -53 -143 -15 -8 -24 -3\n-48 28 -61 78 -65 106 -26 185 42 83 57 93 88 62z m-169 -301 c51 -115 51\n-124 14 -195 -45 -86 -63 -85 -106 1 -35 71 -35 80 5 170 43 98 53 101 87 24z\nm-1439 6 c9 -22 25 -57 35 -77 11 -21 19 -42 19 -48 1 -18 -75 -155 -85 -155\n-15 1 -39 38 -65 102 -20 50 -22 62 -12 96 13 43 66 122 82 122 6 0 17 -18 26\n-40z m370 -29 c19 -35 34 -76 34 -90 -1 -31 -54 -154 -70 -159 -19 -7 -36 16\n-65 84 l-28 66 22 62 c26 72 48 109 63 104 6 -2 26 -32 44 -67z m362 -5 c17\n-41 32 -84 32 -95 0 -12 -16 -53 -36 -92 -41 -82 -47 -81 -95 13 -35 70 -36\n92 -4 164 47 107 59 108 103 10z m347 27 c14 -27 31 -67 38 -90 10 -40 9 -47\n-27 -118 -21 -41 -41 -75 -45 -75 -24 0 -81 112 -81 160 0 15 9 49 21 76 11\n27 24 59 29 72 15 35 36 26 65 -25z m-558 -255 c13 -17 53 -134 60 -174 6 -36\n-36 -128 -63 -138 -38 -15 -84 66 -84 148 0 61 45 176 69 176 5 0 13 -6 18\n-12z m387 -62 c39 -82 44 -127 17 -162 -11 -15 -21 -31 -21 -37 0 -16 -31 -47\n-47 -47 -7 0 -25 26 -39 58 -31 68 -29 130 5 205 29 63 48 59 85 -17z m694 40\nc10 -14 27 -51 37 -82 17 -56 17 -59 -1 -113 -22 -65 -55 -108 -73 -96 -22 13\n-61 108 -61 146 0 58 46 169 70 169 5 0 17 -11 28 -24z m-1404 -51 c16 -35 28\n-79 29 -97 0 -38 -51 -131 -76 -136 -26 -5 -77 84 -77 137 0 63 46 161 75 161\n18 0 27 -13 49 -65z m1075 10 c18 -31 31 -69 31 -87 -1 -39 -58 -152 -80 -156\n-18 -3 -80 112 -80 149 0 37 61 149 81 149 10 0 30 -22 48 -55z m-169 -300\nl30 -62 -19 -54 c-31 -89 -53 -129 -73 -129 -21 0 -88 125 -88 165 0 28 40\n105 73 142 26 29 38 20 77 -62z m-392 48 c39 -55 63 -114 57 -136 -4 -12 -21\n-53 -38 -90 -36 -81 -50 -83 -89 -12 -53 95 -54 112 -17 185 45 89 56 96 87\n53z m720 0 c28 -40 52 -101 52 -133 0 -15 -15 -56 -34 -91 -26 -50 -39 -64\n-57 -64 -17 0 -25 10 -39 50 -10 28 -24 64 -31 81 -11 29 -10 38 16 95 44 100\n59 110 93 62z m-1411 -47 c40 -70 41 -87 6 -168 -30 -72 -46 -93 -62 -83 -18\n11 -81 145 -81 171 0 27 33 98 58 127 25 28 44 17 79 -47z m336 46 c29 -32 59\n-112 52 -140 -10 -43 -68 -152 -81 -152 -16 0 -84 132 -84 163 0 14 11 49 24\n77 33 72 58 86 89 52z m-160 -337 c20 -42 37 -81 37 -89 0 -19 -60 -150 -73\n-158 -6 -4 -17 -2 -25 4 -22 19 -72 125 -72 153 0 40 66 176 82 170 8 -3 31\n-39 51 -80z m329 58 c24 -28 68 -120 68 -143 0 -27 -52 -130 -78 -153 -20 -18\n-21 -17 -62 58 -41 75 -42 77 -30 121 14 47 64 134 78 134 5 0 16 -8 24 -17z\nm1077 -11 c60 -84 48 -282 -17 -282 -25 0 -55 36 -75 88 -23 57 -21 77 9 142\n42 90 51 96 83 52z m-690 -39 c46 -93 46 -97 11 -166 -33 -63 -57 -97 -70 -97\n-13 0 -70 136 -70 166 0 42 60 154 82 154 12 0 28 -20 47 -57z m333 40 c9 -10\n28 -42 43 -71 20 -39 26 -60 21 -85 -7 -38 -76 -132 -96 -132 -8 0 -30 30 -49\n66 -35 65 -35 68 -23 114 13 51 60 124 78 125 6 0 18 -8 26 -17z m-1232 -335\nc37 -78 37 -125 2 -198 -37 -76 -57 -74 -99 10 -37 76 -39 92 -13 145 11 22\n19 45 20 50 0 19 31 55 46 55 8 0 28 -27 44 -62z m362 2 c25 -47 29 -63 24\n-108 -6 -70 -49 -144 -79 -140 -25 4 -75 96 -76 141 -1 31 34 122 58 150 23\n27 40 17 73 -43z m348 13 c46 -75 49 -123 11 -200 -39 -80 -61 -82 -102 -8\n-35 63 -37 117 -6 182 43 91 54 94 97 26z m362 -6 c44 -84 45 -115 7 -197 -26\n-58 -36 -70 -53 -68 -25 4 -66 82 -74 141 -7 54 50 177 82 177 6 0 23 -24 38\n-53z m359 -2 c37 -65 37 -120 2 -203 -30 -72 -54 -79 -83 -25 -9 17 -24 43\n-33 57 -24 37 -21 89 10 149 49 95 62 98 104 22z m-1245 -305 c42 -70 43 -112\n4 -190 -34 -67 -45 -77 -66 -59 -25 21 -64 114 -64 153 0 20 12 63 27 97 34\n76 54 76 99 -1z m361 -10 c36 -74 35 -90 -9 -187 -37 -82 -59 -85 -93 -10 -40\n89 -41 125 -5 201 42 88 62 88 107 -4z m343 16 c6 -19 18 -40 26 -46 32 -27 0\n-145 -56 -204 -18 -19 -19 -18 -39 15 -23 37 -51 121 -51 152 0 16 38 91 63\n124 14 20 44 -2 57 -41z m341 38 c19 -23 59 -126 59 -153 0 -25 -35 -105 -59\n-133 -22 -28 -39 -21 -63 25 -35 69 -49 140 -32 172 56 109 69 120 95 89z\nm358 -15 c10 -11 27 -41 36 -66 16 -42 16 -49 1 -111 -18 -72 -41 -115 -59\n-109 -25 8 -80 120 -80 162 0 40 21 94 51 128 19 22 27 22 51 -4z m-870 -329\nc23 -44 41 -87 41 -97 0 -26 -71 -163 -85 -163 -14 0 -82 108 -91 146 -4 16 3\n41 20 74 14 27 26 55 26 63 0 16 28 57 40 57 5 0 27 -36 49 -80z m721 -5 c31\n-80 32 -89 20 -128 -18 -61 -59 -139 -72 -135 -5 2 -26 30 -46 62 -45 73 -46\n107 -2 209 44 103 57 102 100 -8z m-1434 -1 c19 -41 34 -81 34 -87 0 -13 -64\n-164 -74 -174 -18 -18 -96 107 -96 154 0 51 66 183 91 183 6 0 26 -34 45 -76z\nm356 -5 c28 -55 36 -82 32 -104 -9 -49 -62 -155 -77 -155 -9 0 -30 35 -52 86\nl-37 86 23 62 c27 74 48 108 63 103 6 -2 28 -37 48 -78z m704 36 c45 -67 55\n-106 39 -164 -17 -66 -53 -123 -74 -119 -9 2 -34 38 -55 80 l-39 77 28 63 c24\n55 63 113 71 105 2 -1 15 -20 30 -42z m-168 -325 c45 -85 46 -106 9 -175 -44\n-81 -66 -84 -106 -13 -17 29 -31 65 -31 80 0 30 43 153 62 175 15 18 27 6 66\n-67z m366 -14 c32 -91 32 -96 0 -162 -46 -95 -62 -94 -113 7 -28 56 -29 61\n-16 106 12 42 33 90 58 131 16 25 44 -8 71 -82z m336 44 c47 -93 45 -200 -6\n-247 -32 -29 -50 -21 -79 38 -31 61 -31 92 0 176 36 95 50 101 85 33z m-1412\n-33 c40 -76 40 -108 2 -179 -38 -70 -53 -76 -84 -35 -64 86 -67 125 -19 221\n42 83 54 83 101 -7z m359 -17 l34 -84 -30 -65 c-30 -64 -52 -88 -71 -76 -6 4\n-22 30 -37 58 -34 68 -33 123 3 199 40 83 58 77 101 -32z m525 -259 c43 -84\n46 -132 11 -199 -42 -83 -63 -82 -103 2 -36 79 -37 99 -5 178 39 96 56 99 97\n19z m366 -9 c39 -82 40 -122 5 -193 -40 -77 -63 -78 -101 -2 -46 92 -47 117\n-11 187 51 98 63 99 107 8z m-1431 -7 c19 -35 32 -74 32 -95 0 -46 -58 -145\n-85 -145 -13 0 -27 17 -46 55 -43 87 -45 113 -13 173 52 98 65 99 112 12z\nm359 -1 c31 -64 34 -116 9 -164 -28 -55 -55 -81 -75 -70 -21 11 -70 105 -70\n135 0 30 37 114 62 142 27 30 43 20 74 -43z m355 7 c17 -32 29 -69 29 -91 0\n-48 -57 -160 -81 -160 -25 0 -79 103 -79 152 0 61 57 162 88 156 8 -2 27 -27\n43 -57z m3788 -936 c2 -2 1 -15 -3 -29 -6 -23 -29 -51 -125 -151 -15 -16 -36\n-45 -45 -63 -9 -18 -23 -35 -30 -38 -7 -3 -33 -32 -57 -66 -24 -33 -51 -64\n-60 -68 -8 -5 -325 -9 -703 -9 -578 0 -688 2 -692 14 -3 8 11 49 31 92 96 204\n127 261 158 291 l33 32 639 2 c606 3 845 1 854 -7z m2643 -8 c10 -16 10 -379\n0 -395 -7 -10 -199 -13 -943 -16 -514 -1 -940 -1 -946 2 -31 11 -9 52 92 167\n62 72 112 136 130 166 6 9 31 33 57 53 l48 36 192 3 c392 8 1362 -4 1370 -16z\nm-4300 -27 c-1 -19 -12 -48 -22 -65 -18 -26 -48 -86 -111 -220 -10 -22 -32\n-55 -48 -73 l-30 -32 -560 0 c-524 0 -561 1 -569 18 -10 19 -7 386 3 402 4 7\n224 9 673 8 l667 -3 -3 -35z m2533 30 c15 -24 -10 -75 -66 -138 -33 -37 -79\n-94 -102 -126 -23 -33 -61 -80 -84 -105 l-42 -46 -358 -3 c-216 -1 -364 1\n-373 7 -22 15 8 70 91 166 38 44 98 114 132 155 35 41 74 81 88 87 31 16 704\n19 714 3z m3482 -193 l3 -198 -26 -9 c-40 -15 -1227 -13 -1242 2 -8 8 -12 67\n-12 200 0 168 2 188 18 197 11 7 228 10 637 8 l620 -2 2 -198z\"/\u003e\u003cpath d=\"M17842 5251 c-73 -13 -80 -40 -16 -67 45 -19 204 -19 249 0 39 17 45\n40 14 57 -26 13 -189 20 -247 10z\"/\u003e\u003cpath d=\"M10952 5675 c-7 -15 -12 -75 -12 -141 l0 -116 -40 -15 c-45 -18 -59\n-47 -40 -82 21 -40 145 -21 165 26 4 10 10 82 13 160 4 121 2 146 -12 168 -22\n33 -59 33 -74 0z\"/\u003e\u003cpath d=\"M6098 7749 c-21 -12 -23 -42 -5 -57 7 -6 51 -18 98 -26 46 -9 94 -18\n107 -22 26 -7 52 11 52 36 0 28 -32 48 -100 64 -75 18 -128 20 -152 5z\"/\u003e\u003cpath d=\"M6434 7555 c-4 -8 -3 -28 1 -43 4 -15 11 -100 14 -189 5 -129 9 -166\n22 -178 14 -15 18 -14 40 4 23 19 24 24 26 168 2 119 -1 158 -15 198 -15 45\n-20 50 -50 53 -22 2 -34 -2 -38 -13z\"/\u003e\u003cpath d=\"M8494 7483 c-9 -9 -12 -22 -8 -32 4 -9 9 -108 12 -221 2 -113 8 -213\n13 -222 13 -25 56 -23 70 3 7 14 10 87 7 223 -2 169 -6 206 -20 228 -21 32\n-53 41 -74 21z\"/\u003e\u003cpath d=\"M8346 7466 c-36 -35 -49 -119 -44 -276 5 -140 15 -180 47 -180 35 0\n39 21 36 180 -2 116 2 166 13 201 17 51 10 99 -14 99 -8 0 -25 -11 -38 -24z\"/\u003e\u003cpath d=\"M8680 7283 c-27 -10 -30 -26 -30 -149 0 -101 -4 -130 -22 -173 -27\n-67 -19 -75 80 -79 61 -3 81 -1 91 12 18 21 7 48 -28 67 l-29 17 -4 139 c-3\n159 -12 183 -58 166z\"/\u003e\u003cpath d=\"M6789 6973 c-15 -2 -35 -13 -45 -25 -17 -18 -19 -36 -16 -207 4 -182\n9 -211 38 -211 25 0 34 40 41 182 3 79 10 148 15 155 5 6 32 14 61 18 29 4 58\n12 65 17 18 15 15 46 -7 57 -22 12 -115 21 -152 14z\"/\u003e\u003cpath d=\"M7153 6959 c-34 -34 -2 -65 76 -74 42 -5 62 -12 66 -23 4 -10 11 -84\n15 -167 7 -125 11 -151 26 -162 15 -11 21 -11 38 1 20 12 21 25 24 170 2 147\n-5 210 -28 246 -13 20 -199 28 -217 9z\"/\u003e\u003cpath d=\"M7524 6950 c-12 -5 -32 -23 -45 -42 -23 -32 -24 -38 -21 -198 3 -140\n6 -167 20 -178 9 -7 26 -11 37 -10 17 3 21 13 26 78 4 41 7 113 8 161 0 51 6\n90 13 97 7 7 42 12 85 12 79 0 143 20 143 43 0 28 -63 47 -157 46 -48 0 -98\n-4 -109 -9z\"/\u003e\u003cpath d=\"M8061 6938 c-6 -15 -5 -30 4 -43 11 -18 25 -20 129 -23 122 -3 156 5\n156 38 0 42 -24 50 -156 50 -120 0 -125 -1 -133 -22z\"/\u003e\u003cpath d=\"M6462 6883 c-15 -28 -21 -431 -7 -437 17 -6 31 5 59 47 25 37 26 42\n26 203 0 95 -4 174 -10 185 -13 24 -56 25 -68 2z\"/\u003e\u003cpath d=\"M8317 6676 c-23 -24 -22 -280 1 -327 9 -19 25 -35 34 -37 24 -5 30\n40 32 221 l1 152 -26 3 c-15 2 -33 -4 -42 -12z\"/\u003e\u003cpath d=\"M8516 6654 c-13 -13 -16 -43 -16 -169 0 -85 4 -165 10 -179 12 -32\n45 -34 62 -3 16 28 13 334 -3 354 -15 17 -34 16 -53 -3z\"/\u003e\u003cpath d=\"M6215 6346 c-44 -12 -88 -25 -98 -29 -28 -11 -18 -49 15 -58 39 -10\n179 10 201 29 31 27 16 84 -22 81 -9 -1 -52 -11 -96 -23z\"/\u003e\u003cpath d=\"M6010 6227 c-34 -17 -40 -84 -12 -131 19 -32 19 -33 0 -56 -38 -47 5\n-150 62 -150 16 0 32 5 36 12 14 22 3 82 -22 126 l-25 43 25 30 c58 69 10 163\n-64 126z\"/\u003e\u003cpath d=\"M7343 6168 c-24 -31 -33 -90 -33 -217 0 -107 3 -141 16 -159 17 -24\n43 -29 62 -10 15 15 16 286 2 339 -13 45 -33 65 -47 47z\"/\u003e\u003cpath d=\"M7481 6146 c-21 -25 -31 -137 -23 -261 6 -110 9 -120 27 -123 11 -1\n29 4 40 12 19 13 20 26 20 173 0 87 -3 170 -8 186 -8 30 -37 36 -56 13z\"/\u003e\u003cpath d=\"M6736 6133 c-12 -30 -17 -196 -9 -283 7 -76 10 -85 29 -88 42 -6 49\n20 49 193 0 122 -3 166 -14 178 -17 22 -47 22 -55 0z\"/\u003e\u003cpath d=\"M8326 5951 c-53 -58 -15 -426 39 -381 9 7 15 54 20 153 10 211 -9\n283 -59 228z\"/\u003e\u003cpath d=\"M8510 5921 c-6 -11 -10 -90 -10 -185 0 -136 3 -167 16 -180 19 -19\n36 -20 52 -4 15 15 17 340 2 369 -6 10 -19 19 -30 19 -11 0 -24 -9 -30 -19z\"/\u003e\u003cpath d=\"M5999 5818 c-33 -14 -53 -17 -84 -12 -48 9 -71 6 -107 -12 -20 -11\n-34 -11 -55 -3 -52 20 -103 -15 -88 -61 10 -32 41 -43 80 -29 30 11 37 10 54\n-5 29 -26 85 -14 108 22 33 51 50 48 74 -11 7 -18 21 -42 32 -55 25 -27 15\n-40 -36 -49 -28 -4 -52 1 -98 22 -51 22 -65 25 -86 16 -13 -6 -41 -8 -63 -5\n-33 5 -40 3 -55 -19 -20 -32 -14 -55 26 -93 l30 -29 161 2 c135 2 163 5 179\n19 23 21 25 61 2 86 -15 17 -15 21 2 56 10 20 21 44 25 52 4 8 20 17 36 18 37\n5 54 19 54 46 0 30 -19 46 -55 46 -16 0 -44 4 -61 9 -24 7 -42 4 -75 -11z\"/\u003e\u003cpath d=\"M6315 5813 c-53 -14 -57 -39 -14 -88 36 -41 70 -46 93 -13 41 58 -7\n119 -79 101z\"/\u003e\u003cpath d=\"M2413 5672 c-6 -4 -14 -24 -18 -45 -6 -29 -15 -42 -39 -54 -50 -25\n-56 -43 -28 -71 17 -17 59 -18 846 -17 812 2 828 2 854 22 15 11 27 26 27 34\n0 36 -52 38 -783 36 -697 -2 -714 -2 -728 17 -8 11 -11 28 -8 38 9 31 -14 48\n-65 48 -25 0 -51 -4 -58 -8z\"/\u003e\u003cpath d=\"M6326 5604 c-32 -31 -13 -65 49 -89 35 -13 79 -18 183 -19 147 -1\n202 11 202 44 0 28 -46 39 -185 42 -97 3 -138 8 -162 21 -40 21 -67 22 -87 1z\"/\u003e\u003cpath d=\"M4323 5566 c-17 -8 -37 -25 -44 -37 -16 -30 -6 -151 17 -217 15 -41\n16 -54 6 -64 -9 -9 -85 -12 -296 -13 -291 0 -316 -3 -316 -41 0 -32 43 -37\n333 -39 158 -2 290 -5 292 -7 2 -2 -3 -24 -12 -48 -21 -56 -23 -202 -4 -247 7\n-18 21 -35 30 -38 9 -2 82 -6 162 -7 132 -3 149 -1 168 16 24 22 27 41 9 53\n-7 4 -73 10 -146 13 -154 6 -162 10 -162 92 0 46 2 50 35 64 22 9 69 14 129\n14 108 0 141 16 141 67 l0 28 149 3 c93 2 153 -1 161 -8 7 -6 13 -22 13 -36 0\n-53 19 -59 178 -57 93 2 151 7 160 14 8 6 14 29 14 50 l0 38 158 3 157 3 0 35\n0 35 -142 0 c-94 0 -146 4 -154 12 -6 6 -14 26 -18 45 l-7 33 -133 9 c-78 5\n-150 5 -175 -1 l-41 -9 3 -45 3 -46 -128 2 c-165 3 -180 7 -193 55 -13 47 -22\n50 -170 50 -77 0 -120 4 -128 12 -18 18 -15 103 4 122 12 13 39 16 127 16 94\n0 117 3 145 20 35 22 41 44 15 56 -10 4 -83 9 -163 11 -111 2 -153 0 -177 -11z\"/\u003e\u003cpath d=\"M5062 5570 c-19 -4 -39 -13 -45 -20 -18 -18 25 -48 80 -56 59 -9 216\n1 242 16 26 14 27 46 2 60 -23 12 -230 12 -279 0z\"/\u003e\u003cpath d=\"M6736 5383 c-2 -10 -8 -40 -12 -66 -6 -42 -12 -51 -45 -73 -50 -31\n-52 -60 -4 -79 44 -19 59 -47 52 -100 -7 -47 4 -65 40 -65 17 0 24 8 32 38 6\n20 11 47 11 60 0 12 8 30 18 40 19 19 14 19 409 25 45 1 71 -26 78 -82 9 -64\n21 -91 44 -91 28 0 38 18 45 85 4 33 11 64 17 70 16 16 39 -23 39 -68 0 -48\n15 -77 39 -77 28 0 41 22 48 78 3 27 9 56 14 63 13 21 704 22 725 2 10 -11 14\n-42 15 -116 1 -115 7 -145 31 -161 26 -16 36 1 53 82 12 57 13 81 4 117 -14\n57 5 95 50 95 53 0 60 -20 63 -189 3 -148 4 -154 25 -162 45 -16 53 9 53 159\n0 131 1 137 27 175 22 31 25 43 17 65 -9 27 -10 27 -134 34 -69 4 -299 5 -512\n2 -212 -3 -396 -3 -407 1 -18 5 -21 14 -21 56 0 62 -13 89 -44 89 -34 0 -44\n-18 -48 -80 -3 -47 -6 -55 -23 -55 -17 0 -20 8 -23 50 -4 56 -25 87 -56 83\n-17 -2 -24 -16 -35 -61 -21 -91 -24 -92 -275 -88 -126 2 -216 7 -223 13 -7 6\n-13 29 -13 52 0 22 -6 52 -13 66 -15 31 -53 39 -61 13z\"/\u003e\u003cpath d=\"M5786 5333 c-50 -2 -96 -9 -103 -15 -7 -6 -13 -23 -13 -39 l0 -28\n158 -3 157 -3 3 -47 c4 -59 3 -59 -172 -56 -113 3 -138 0 -146 -12 -13 -21\n-12 -33 4 -56 13 -17 26 -19 113 -17 54 1 133 2 176 2 74 1 81 3 106 30 43 46\n102 71 169 71 62 0 87 14 76 43 -9 25 -33 31 -164 36 l-125 6 -3 32 c-2 17 -9\n36 -15 41 -16 13 -111 19 -221 15z\"/\u003e\u003cpath d=\"M5493 5025 c-22 -9 -40 -29 -57 -64 -14 -27 -34 -52 -43 -55 -10 -3\n-88 -8 -174 -10 -165 -5 -215 -16 -205 -42 3 -9 6 -19 6 -24 0 -21 64 -32 167\n-29 131 5 138 -4 69 -84 -74 -86 -92 -147 -66 -219 13 -37 12 -40 -49 -163\n-35 -69 -67 -128 -72 -131 -5 -3 -23 -31 -40 -62 -16 -31 -39 -72 -51 -91 -18\n-29 -22 -50 -22 -129 -1 -58 3 -97 10 -99 5 -2 44 63 84 144 41 82 85 162 97\n179 13 17 47 84 77 149 30 65 61 123 68 130 7 6 32 17 55 24 24 6 47 20 53 31\n12 22 76 198 122 335 17 50 34 95 38 100 4 6 12 25 19 44 9 28 8 39 -4 58 -18\n26 -36 28 -82 8z\"/\u003e\u003cpath d=\"M5796 4891 c-60 -5 -82 -10 -90 -23 -18 -29 5 -52 55 -58 24 -3 56\n-14 72 -24 28 -19 48 -18 104 5 30 12 34 11 58 -11 14 -13 25 -27 25 -31 0\n-14 -55 -98 -64 -99 -4 0 -21 11 -38 25 -32 27 -49 30 -79 15 -21 -12 -26 -59\n-9 -91 13 -23 66 -26 93 -5 16 12 24 10 69 -20 54 -37 56 -37 150 -13 28 7 39\n16 44 34 10 39 -2 55 -38 55 -44 0 -53 8 -73 57 -15 39 -15 43 0 67 19 28 14\n86 -8 104 -16 12 -172 20 -271 13z\"/\u003e\u003cpath d=\"M6435 4891 c-72 -13 -125 -50 -125 -88 0 -16 8 -27 27 -34 21 -8 33\n-5 63 15 35 23 47 25 190 28 147 3 152 4 171 27 36 44 11 53 -148 57 -76 1\n-156 -1 -178 -5z\"/\u003e\u003cpath d=\"M2348 4878 c-20 -7 -28 -17 -28 -34 0 -39 76 -68 155 -59 33 4 396\n10 807 13 694 7 749 8 765 25 17 16 16 18 -5 40 l-23 22 -822 2 c-535 1 -832\n-2 -849 -9z\"/\u003e\u003cpath d=\"M6296 4675 c-22 -23 -32 -85 -15 -96 21 -13 62 -11 86 6 26 19 39 70\n23 90 -16 20 -74 19 -94 0z\"/\u003e\u003cpath d=\"M6747 4626 c-16 -17 -32 -247 -21 -317 13 -85 44 -105 70 -44 19 47\n20 282 0 329 -17 42 -30 50 -49 32z\"/\u003e\u003cpath d=\"M7479 4624 c-10 -13 -15 -58 -17 -181 -4 -175 0 -193 44 -193 18 0\n25 8 33 38 15 50 13 269 -2 312 -14 39 -37 49 -58 24z\"/\u003e\u003cpath d=\"M7325 4590 c-23 -44 -21 -273 3 -319 24 -48 38 -49 60 -4 17 33 19\n54 15 173 -5 137 -16 180 -48 180 -8 0 -21 -13 -30 -30z\"/\u003e\u003cpath d=\"M8320 4495 c-15 -18 -24 -191 -13 -270 7 -53 11 -60 32 -63 13 -2 28\n1 34 7 16 16 21 276 7 312 -13 31 -40 38 -60 14z\"/\u003e\u003cpath d=\"M6032 4493 c-34 -13 -53 -95 -31 -134 8 -16 7 -30 -5 -60 -20 -49\n-21 -103 -2 -118 8 -7 34 -11 58 -9 40 3 43 5 46 35 2 18 -6 49 -17 72 -26 50\n-26 65 -2 99 51 72 23 143 -47 115z\"/\u003e\u003cpath d=\"M8524 4432 c-26 -17 -30 -52 -24 -190 5 -129 8 -144 28 -164 45 -45\n62 18 55 199 -7 153 -18 183 -59 155z\"/\u003e\u003cpath d=\"M5808 4131 c-54 -11 -88 -37 -88 -67 l0 -27 83 5 c114 6 180 43 147\n83 -13 16 -76 18 -142 6z\"/\u003e\u003cpath d=\"M6111 4126 c-22 -26 0 -63 41 -70 18 -4 56 -14 85 -23 64 -21 103 -9\n103 32 0 21 -8 30 -43 45 -23 10 -72 22 -108 26 -53 5 -67 3 -78 -10z\"/\u003e\u003cpath d=\"M5575 3926 c-34 -34 -44 -83 -46 -245 -3 -128 -1 -145 15 -157 23\n-17 63 0 69 30 2 11 3 77 2 146 -3 106 0 130 16 162 23 45 23 52 3 72 -21 22\n-31 20 -59 -8z\"/\u003e\u003cpath d=\"M6447 3933 c-2 -5 -2 -93 1 -196 4 -154 7 -191 21 -208 10 -13 22\n-18 33 -14 31 12 40 72 36 232 -3 131 -5 154 -22 172 -19 20 -61 29 -69 14z\"/\u003e\u003cpath d=\"M7475 3856 c-14 -21 -16 -52 -13 -191 l3 -167 40 -35 40 -34 0 -143\nc0 -120 3 -146 18 -170 26 -40 49 -30 66 29 11 41 12 75 3 195 -6 80 -14 153\n-18 163 -3 10 -19 24 -35 33 l-29 15 0 133 c0 73 -5 147 -11 165 -13 38 -42\n41 -64 7z\"/\u003e\u003cpath d=\"M6739 3854 c-11 -14 -14 -55 -12 -202 1 -108 7 -190 12 -195 6 -6 40\n-14 76 -18 81 -10 85 -13 85 -50 0 -35 35 -75 75 -85 40 -10 65 19 65 75 0 42\n-4 51 -42 88 -37 35 -51 41 -102 47 -33 4 -66 12 -73 18 -10 8 -13 46 -13 147\n0 140 -10 183 -41 189 -9 1 -22 -5 -30 -14z\"/\u003e\u003cpath d=\"M7342 3862 c-22 -15 -32 -74 -32 -200 l0 -123 -35 -15 c-19 -7 -50\n-14 -69 -14 -34 0 -117 -49 -129 -76 -3 -5 1 -32 8 -60 16 -63 46 -84 91 -63\n22 11 33 27 45 64 l16 50 56 5 c44 4 63 11 83 32 l27 27 1 170 c0 152 -2 172\n-19 190 -20 23 -24 24 -43 13z\"/\u003e\u003cpath d=\"M8116 3535 c-21 -8 -44 -19 -50 -25 -14 -14 -22 -331 -9 -380 8 -30\n14 -35 42 -38 37 -4 51 -29 51 -91 0 -42 14 -61 47 -61 39 0 45 31 41 184 -4\n153 -11 177 -58 201 -27 14 -30 20 -30 65 0 27 5 52 11 55 16 10 30 55 24 75\n-8 26 -26 30 -69 15z\"/\u003e\u003cpath d=\"M5536 3244 c-11 -28 -5 -307 7 -353 14 -52 41 -73 76 -60 25 10 25 7\n1 139 -7 39 -9 95 -5 141 8 94 -10 149 -48 149 -14 0 -28 -7 -31 -16z\"/\u003e\u003cpath d=\"M8740 2981 c-15 -29 -12 -49 10 -71 23 -23 72 -26 90 -5 15 18 -3 80\n-26 89 -31 12 -63 6 -74 -13z\"/\u003e\u003cpath d=\"M8069 2713 c-19 -22 -26 -310 -10 -371 11 -37 15 -42 42 -42 22 0 34\n-7 49 -32 28 -48 38 -58 54 -52 21 8 24 20 31 147 12 179 -6 245 -60 231 -25\n-6 -28 -1 -40 68 -5 36 -27 68 -44 68 -5 0 -15 -7 -22 -17z\"/\u003e\u003cpath d=\"M7570 2695 c-17 -44 -32 -216 -25 -282 4 -40 14 -72 27 -88 19 -24\n22 -25 37 -10 13 13 17 44 19 174 2 87 -1 173 -5 192 -12 43 -39 50 -53 14z\"/\u003e","end_paths":"\u003cpath d=\"M4675 11220 c-414 -4 -555 -8 -572 -17 -29 -17 -122 -16 -203 2 -52\n12 -184 14 -677 15 -336 0 -618 -3 -627 -6 -19 -7 -22 -64 -4 -82 9 -9 86 -12\n282 -12 150 0 278 -4 286 -10 12 -7 15 -46 16 -217 1 -222 8 -269 48 -300 21\n-17 57 -18 496 -16 458 2 476 1 522 -19 30 -13 55 -33 68 -54 12 -18 30 -36\n41 -39 30 -10 66 19 73 59 4 19 12 39 19 43 14 9 614 15 705 7 34 -3 69 -12\n76 -20 8 -8 18 -40 22 -71 8 -71 17 -83 61 -83 33 0 35 -1 29 -27 -11 -46 -18\n-325 -9 -372 5 -25 13 -46 19 -48 14 -5 124 188 124 216 0 12 -9 48 -21 80\nl-20 60 25 53 c13 29 34 82 46 118 12 36 28 72 36 80 12 13 60 15 302 15 l287\n0 3 -66 c2 -36 -6 -144 -17 -240 -18 -154 -25 -188 -65 -295 -25 -67 -67 -167\n-95 -222 -28 -56 -60 -138 -72 -183 -42 -164 -7 -409 77 -532 19 -29 68 -89\n107 -134 56 -65 81 -85 112 -94 22 -6 66 -24 97 -40 99 -50 274 -111 369 -129\n66 -13 452 -204 525 -261 28 -21 54 -39 58 -39 21 0 180 -101 236 -150 36 -31\n76 -63 90 -70 37 -20 154 -118 213 -179 29 -30 81 -82 115 -115 148 -141 227\n-225 278 -296 30 -41 76 -100 102 -132 26 -31 69 -91 95 -135 26 -43 70 -114\n98 -158 70 -112 223 -428 264 -543 18 -53 48 -135 65 -181 70 -191 151 -639\n166 -919 5 -90 12 -134 26 -160 23 -47 23 -100 -1 -126 -15 -18 -20 -50 -30\n-204 -20 -316 -68 -570 -147 -792 -25 -69 -54 -154 -65 -190 -18 -60 -94 -236\n-177 -408 -19 -40 -48 -89 -64 -110 -17 -20 -50 -75 -73 -122 -39 -76 -84\n-144 -172 -263 -43 -58 -181 -217 -232 -267 -25 -25 -84 -89 -131 -143 -46\n-53 -88 -97 -93 -97 -5 0 -43 -33 -85 -73 -42 -40 -95 -86 -117 -102 -22 -16\n-59 -45 -81 -65 -107 -91 -225 -164 -252 -156 -13 4 -50 64 -105 169 -47 89\n-117 218 -156 287 -78 137 -97 182 -84 203 4 7 53 54 109 104 55 51 127 122\n160 160 32 37 90 102 129 143 120 129 256 338 366 562 22 46 48 99 58 118 34\n66 132 391 141 468 5 42 16 110 24 150 9 40 16 97 16 125 0 67 18 179 31 192\n6 6 61 12 124 16 117 5 145 15 145 50 0 36 -47 54 -145 55 -116 2 -111 1 -129\n20 -20 19 -23 163 -4 182 7 7 43 12 89 12 102 0 129 10 129 49 0 43 -28 55\n-112 48 -38 -3 -81 -1 -98 4 -36 13 -51 50 -86 219 -14 68 -30 132 -34 141 -5\n9 -23 67 -40 130 -34 123 -172 421 -238 514 -20 28 -48 71 -62 96 -55 102\n-151 220 -296 363 -189 188 -195 193 -274 247 -36 24 -92 64 -124 88 -125 93\n-362 221 -501 272 -60 22 -132 49 -160 59 -181 68 -547 134 -710 128 l-80 -3\n-3 -36 c-2 -23 2 -40 12 -49 9 -7 75 -18 155 -26 216 -20 473 -71 621 -122\n117 -41 247 -95 285 -119 120 -74 242 -143 252 -143 7 0 30 -15 50 -34 21 -18\n61 -49 89 -67 115 -76 197 -149 348 -309 73 -77 195 -223 219 -261 15 -24 40\n-62 57 -84 16 -22 43 -72 60 -112 16 -39 52 -106 78 -150 63 -101 172 -419\n207 -600 23 -119 24 -129 8 -140 -26 -20 -831 -18 -878 1 -40 17 -50 35 -76\n127 -21 74 -120 289 -163 352 -14 21 -33 52 -42 69 -55 105 -236 294 -376 390\n-112 78 -322 182 -438 217 -147 44 -230 63 -313 72 -115 12 -135 17 -148 40\n-6 12 -10 153 -10 380 1 227 -3 368 -10 380 -13 26 -55 25 -69 -2 -8 -14 -11\n-131 -9 -380 3 -430 13 -398 -128 -409 -48 -4 -128 -19 -178 -33 -176 -51\n-220 -65 -255 -80 -19 -8 -65 -27 -103 -42 -37 -15 -100 -51 -140 -79 -39 -28\n-96 -66 -125 -84 -30 -18 -76 -55 -103 -82 -27 -27 -69 -63 -94 -80 -25 -17\n-45 -35 -45 -40 0 -5 -18 -30 -40 -55 -22 -25 -40 -50 -40 -55 0 -4 -17 -30\n-38 -57 -45 -57 -112 -176 -142 -252 -12 -30 -32 -78 -46 -106 -13 -29 -24\n-57 -24 -62 0 -21 -44 -118 -59 -130 -9 -8 -44 -13 -88 -13 -77 0 -93 -10 -93\n-59 0 -27 14 -34 90 -40 l65 -6 3 -86 c2 -66 -1 -90 -12 -102 -13 -12 -78 -14\n-453 -13 l-438 1 0 92 c0 54 5 97 11 103 7 7 76 11 200 11 219 1 261 8 270 46\n13 48 -8 53 -237 53 -175 0 -210 2 -223 16 -20 19 -20 16 5 121 32 139 116\n385 185 543 80 181 116 250 169 320 23 30 49 69 58 85 9 17 48 66 88 110 39\n44 84 98 100 120 48 68 357 348 417 379 15 8 58 35 97 61 63 42 136 84 243\n139 21 10 62 33 92 51 73 44 313 122 462 150 45 9 122 25 170 35 48 11 124 20\n170 20 94 1 157 12 169 32 5 7 9 28 9 46 0 55 -23 58 -216 33 -226 -30 -368\n-62 -559 -126 -138 -46 -194 -68 -335 -134 -25 -12 -72 -38 -177 -100 -32 -18\n-74 -48 -94 -65 -20 -17 -70 -51 -110 -76 -41 -25 -95 -65 -121 -90 -26 -25\n-62 -57 -80 -73 -146 -122 -173 -149 -285 -289 -107 -132 -131 -165 -147 -197\n-10 -18 -33 -54 -51 -80 -67 -93 -197 -362 -242 -501 -8 -25 -28 -76 -45 -115\n-17 -38 -36 -101 -43 -140 -35 -192 -47 -240 -67 -257 -16 -14 -39 -18 -110\n-18 -105 0 -128 -9 -128 -50 0 -16 4 -31 8 -34 5 -3 51 -8 103 -12 52 -4 100\n-11 107 -17 16 -13 16 -134 -1 -167 -12 -24 -16 -25 -110 -25 -86 0 -99 -2\n-118 -22 -20 -19 -21 -25 -10 -51 17 -41 49 -52 147 -52 82 0 85 -1 94 -26 6\n-14 10 -64 10 -112 1 -52 10 -133 25 -202 70 -339 83 -387 116 -453 11 -20 31\n-69 45 -108 64 -177 191 -410 290 -529 20 -25 44 -61 52 -80 7 -19 47 -69 88\n-111 41 -42 74 -81 74 -87 0 -16 185 -199 265 -263 39 -31 89 -66 111 -77 22\n-11 46 -28 54 -37 8 -9 32 -26 54 -37 23 -11 82 -46 131 -78 50 -32 104 -61\n120 -65 17 -3 37 -13 46 -21 18 -16 248 -108 321 -129 25 -7 51 -16 57 -19 16\n-10 278 -76 300 -76 10 0 25 -7 32 -16 11 -13 10 -24 -6 -67 -16 -42 -20 -78\n-20 -182 -1 -79 -5 -141 -13 -158 -7 -16 -12 -45 -12 -66 0 -26 -7 -44 -22\n-58 -39 -35 -191 -133 -217 -140 -13 -3 -54 0 -90 6 -62 12 -268 74 -302 91\n-8 4 -44 15 -78 24 -35 9 -93 30 -131 46 -38 17 -73 30 -79 30 -5 0 -58 22\n-115 49 -58 27 -116 53 -128 57 -30 9 -337 182 -363 204 -11 9 -46 31 -78 48\n-31 18 -103 69 -158 115 -56 45 -113 91 -128 101 -14 11 -64 55 -111 98 -47\n44 -92 85 -100 92 -8 7 -83 83 -165 167 -144 148 -222 238 -296 343 -19 27\n-49 70 -67 95 -18 25 -49 78 -69 116 -19 39 -48 86 -63 105 -35 47 -94 153\n-120 220 -12 30 -44 100 -72 155 -28 55 -72 168 -98 250 -26 83 -60 182 -74\n220 -40 105 -104 403 -116 545 -6 69 -16 159 -21 200 -18 141 -12 470 11 645\n41 317 63 438 105 598 63 237 73 271 99 324 13 26 31 75 41 108 9 33 67 157\n128 275 106 206 134 255 252 435 28 44 60 94 70 110 26 43 80 106 158 186 37\n38 67 73 67 78 0 17 302 308 422 408 112 93 281 217 358 263 41 24 105 66 142\n92 37 26 93 61 125 78 236 126 532 409 639 612 10 20 41 70 68 110 33 48 64\n115 94 198 110 309 152 491 152 653 0 88 -2 97 -21 108 -34 18 -73 -17 -77\n-67 -12 -177 -73 -470 -117 -570 -14 -31 -25 -62 -25 -68 0 -21 -94 -202 -123\n-236 -16 -18 -41 -59 -57 -90 -16 -32 -46 -78 -67 -103 -21 -25 -60 -73 -88\n-106 -27 -33 -53 -61 -57 -61 -3 0 -54 -44 -113 -98 -74 -69 -137 -117 -208\n-157 -56 -32 -115 -69 -132 -82 -37 -29 -340 -230 -375 -248 -14 -7 -50 -35\n-82 -62 -31 -26 -76 -61 -99 -78 -85 -60 -301 -257 -326 -298 -4 -7 -18 -20\n-30 -29 -24 -15 -91 -93 -153 -174 -19 -25 -55 -68 -80 -94 -25 -27 -74 -98\n-109 -157 -35 -59 -76 -121 -91 -138 -50 -57 -127 -190 -235 -410 -59 -121\n-114 -247 -122 -280 -9 -33 -26 -80 -38 -105 -12 -25 -33 -88 -47 -140 -57\n-212 -119 -457 -125 -493 -9 -57 -32 -68 -128 -61 -44 4 -84 11 -90 15 -5 5\n-12 41 -16 80 -8 88 -44 146 -104 169 -60 22 -431 17 -480 -6 -46 -21 -75 -70\n-81 -136 -12 -123 -21 -129 -216 -125 -110 2 -138 -1 -164 -15 -17 -10 -35\n-25 -38 -35 -10 -26 -7 -1604 4 -1818 5 -104 14 -287 20 -405 6 -118 18 -307\n27 -420 8 -113 17 -290 19 -395 3 -104 9 -239 15 -300 5 -60 14 -204 19 -320\n5 -115 14 -289 20 -385 6 -96 15 -249 20 -340 14 -262 57 -453 133 -590 16\n-30 47 -88 68 -128 47 -90 171 -231 259 -295 36 -26 91 -68 123 -93 32 -25 72\n-50 90 -56 38 -13 64 -35 53 -45 -9 -9 -334 -21 -636 -22 -154 -1 -219 -4\n-228 -13 -18 -18 -15 -65 4 -72 14 -5 1595 -6 6934 -2 641 1 1190 -1 1220 -3\n30 -2 213 -1 405 2 388 6 524 21 686 76 178 60 357 163 465 267 33 33 87 84\n119 114 54 50 155 197 155 226 0 6 16 44 35 83 19 39 35 73 35 76 0 3 15 45\n34 93 19 48 37 105 40 127 14 85 37 442 46 700 5 149 14 353 19 455 6 102 16\n291 22 420 6 129 15 282 20 340 21 234 31 746 33 1726 1 1013 1 1032 -19 1054\n-18 20 -26 21 -172 18 -186 -4 -182 -6 -192 115 -7 90 -14 105 -67 138 -29 18\n-58 22 -206 29 -183 9 -240 4 -314 -29 -49 -22 -64 -48 -64 -114 -1 -52 -15\n-116 -29 -130 -14 -14 -287 -10 -312 4 -19 10 -29 41 -94 289 -24 91 -55 198\n-69 239 -14 41 -26 81 -26 89 0 8 -9 33 -20 56 -10 23 -33 75 -51 116 -18 41\n-38 84 -45 95 -7 11 -39 79 -71 150 -34 76 -82 161 -114 205 -31 41 -76 110\n-100 152 -24 42 -63 99 -85 125 -103 119 -153 182 -168 211 -16 31 -176 200\n-207 218 -8 5 -22 18 -30 30 -21 31 -144 139 -219 191 -36 26 -92 73 -125 106\n-33 32 -73 66 -90 74 -16 8 -79 47 -140 87 -205 136 -270 174 -350 206 -44 17\n-121 53 -171 80 -57 30 -163 71 -280 109 -254 82 -347 130 -442 229 -41 42\n-81 93 -89 112 -8 19 -24 55 -36 80 -27 57 -37 267 -17 334 21 65 99 254 136\n328 40 80 96 328 118 522 23 204 24 204 339 205 l217 1 10 24 c12 33 2 65 -24\n71 -11 3 -279 6 -595 8 -655 2 -611 -4 -568 88 14 29 42 104 62 164 20 61 44\n116 53 123 12 9 131 12 518 12 303 0 513 4 528 10 21 8 26 16 26 44 0 18 -6\n38 -12 43 -7 6 -58 13 -113 17 -55 4 -145 11 -200 16 -119 12 -1035 17 -1800\n10z m552 -162 c15 -16 17 -37 15 -180 -3 -137 -6 -165 -19 -175 -23 -18 -1918\n-19 -1929 -1 -4 6 -6 88 -5 182 2 145 4 173 18 183 13 10 222 12 959 10 881\n-2 944 -3 961 -19z m358 -2 c12 -16 12 -24 -2 -55 -9 -20 -35 -92 -59 -161\n-24 -69 -52 -131 -62 -138 -22 -17 -92 -9 -108 13 -12 16 -24 165 -19 240 1\n22 3 52 4 67 2 51 24 60 133 56 84 -2 102 -6 113 -22z m-177 -513 c4 -31 -34\n-116 -50 -111 -17 6 -23 105 -7 124 18 22 53 13 57 -13z m-108 -4104 c25 -6\n77 -12 115 -14 94 -4 404 -67 448 -91 128 -69 303 -176 359 -219 104 -80 239\n-228 313 -340 116 -179 222 -428 195 -461 -6 -6 -35 -15 -65 -19 -66 -8 -105\n-35 -89 -62 14 -22 44 -31 115 -32 83 -1 94 -14 94 -103 0 -64 -4 -80 -27\n-116 -34 -51 -35 -72 -3 -102 23 -22 25 -30 25 -124 0 -120 -21 -198 -110\n-406 -69 -161 -160 -307 -252 -403 -32 -33 -40 -37 -58 -27 -11 6 -32 30 -46\n53 -15 23 -41 56 -58 74 -56 58 -86 96 -86 110 0 22 30 74 66 117 18 21 51 82\n74 135 23 53 52 121 65 151 31 72 52 151 60 223 4 39 13 64 26 75 10 9 28 25\n40 35 26 23 18 52 -26 92 -29 27 -34 38 -40 99 -9 93 -11 96 -54 96 -51 0 -60\n-13 -54 -76 7 -65 -8 -104 -47 -128 -32 -18 -49 -61 -33 -77 6 -6 25 -18 44\n-27 l34 -17 -3 -70 c-4 -90 -22 -151 -84 -283 -61 -132 -99 -190 -175 -267\n-143 -147 -228 -209 -366 -265 -117 -48 -225 -72 -307 -68 l-65 3 3 58 c4 64\n-8 87 -42 87 -34 0 -46 -20 -46 -77 0 -45 -4 -55 -25 -69 -31 -20 -114 -14\n-220 16 -61 17 -101 34 -225 95 -136 66 -223 141 -344 299 -74 96 -106 158\n-156 306 -23 67 -33 115 -34 163 -1 74 7 87 55 87 34 0 51 21 47 56 -3 29 -11\n35 -72 59 l-39 15 7 63 c14 120 17 112 -36 115 l-46 3 -11 -51 c-6 -28 -11\n-56 -11 -63 0 -7 -11 -29 -25 -49 -32 -47 -32 -83 0 -158 14 -33 30 -95 36\n-137 16 -123 46 -210 110 -325 32 -59 59 -111 59 -117 0 -13 81 -110 166 -197\n50 -51 90 -82 143 -108 41 -21 87 -46 102 -57 65 -46 262 -113 413 -140 105\n-18 108 -23 104 -184 -4 -175 -2 -173 -136 -157 -196 23 -505 126 -589 196\n-15 13 -51 35 -78 49 -71 35 -124 78 -225 182 -119 123 -179 197 -225 280 -21\n39 -50 88 -65 110 -31 45 -85 196 -95 265 -4 25 -18 92 -31 148 -33 141 -32\n146 21 198 25 24 45 49 45 57 0 18 -19 40 -53 61 -51 31 -51 50 -3 259 25 106\n52 212 61 236 23 67 119 236 182 321 18 25 45 63 60 85 39 59 256 254 333 300\n37 22 103 61 146 88 119 71 408 155 549 158 28 1 61 5 75 9 34 11 39 11 90 -1z\nm4462 -359 c23 -29 25 -112 2 -131 -9 -7 -42 -15 -74 -17 -53 -4 -61 -2 -84\n21 -36 36 -36 98 0 134 23 23 31 25 81 21 43 -4 61 -10 75 -28z m-8820 -20\nc22 -27 24 -98 4 -125 -12 -16 -25 -19 -82 -17 -40 1 -73 7 -80 14 -6 7 -14\n37 -17 66 -5 45 -3 56 15 74 18 18 29 20 82 15 46 -4 65 -11 78 -27z m9374\n-256 c14 -18 13 -469 -2 -484 -6 -6 -238 -11 -597 -14 -419 -4 -593 -9 -609\n-17 -38 -20 -48 9 -48 145 0 68 -7 152 -15 191 -19 88 -19 169 -2 184 16 13\n301 17 862 13 337 -2 402 -5 411 -18z m-8940 -4 c29 0 33 -14 23 -85 -5 -33\n-9 -111 -9 -173 0 -62 -7 -163 -15 -224 -10 -73 -15 -200 -15 -368 0 -205 -3\n-260 -14 -275 -14 -19 -30 -20 -393 -20 l-379 0 -42 -27 c-23 -16 -49 -43 -58\n-60 -10 -18 -26 -45 -36 -59 -19 -25 -19 -35 -8 -275 7 -137 14 -252 16 -255\n2 -4 11 -170 19 -370 8 -200 20 -422 25 -494 6 -71 17 -287 25 -480 27 -636\n44 -763 132 -985 41 -102 201 -360 224 -360 5 0 25 -22 44 -49 19 -27 61 -68\n93 -92 31 -24 71 -55 87 -70 37 -33 229 -131 310 -158 87 -28 275 -69 385 -82\n69 -8 286 -10 786 -5 505 6 694 4 699 -4 11 -17 -13 -39 -130 -117 -60 -41\n-132 -89 -160 -108 -117 -79 -259 -172 -299 -195 -23 -14 -65 -44 -93 -67\n-100 -84 -81 -82 -669 -78 -574 3 -580 4 -755 70 -52 20 -111 47 -131 60 -20\n13 -49 27 -64 31 -15 4 -67 33 -115 66 -92 62 -199 170 -265 268 -21 30 -49\n73 -64 95 -96 143 -155 417 -170 795 -5 124 -14 281 -19 350 -6 69 -15 233\n-21 365 -12 248 -21 420 -42 755 -6 107 -12 238 -13 290 -2 115 -21 488 -35\n678 -23 314 -34 1042 -16 1089 4 10 51 13 213 14 216 0 275 9 281 41 2 10 -8\n24 -24 35 -25 16 -52 18 -241 18 -128 0 -216 4 -222 10 -13 13 -25 409 -14\n460 l9 40 189 5 c144 4 777 4 971 0z m6416 -619 c15 -20 18 -37 16 -95 -4\n-106 20 -101 -468 -99 -403 1 -405 1 -422 23 -22 27 -26 161 -5 178 19 16 107\n19 501 18 l358 -2 20 -23z m2518 9 c20 -20 20 -26 16 -413 -3 -215 -9 -428\n-15 -472 -5 -44 -14 -244 -21 -445 -6 -201 -15 -396 -21 -435 -5 -38 -13 -182\n-19 -320 -5 -137 -14 -299 -20 -360 -5 -60 -17 -283 -25 -495 -9 -212 -20\n-439 -25 -505 -5 -66 -14 -190 -20 -275 -14 -210 -27 -305 -46 -342 -9 -17\n-25 -58 -36 -92 -30 -93 -125 -253 -193 -326 -89 -95 -145 -148 -187 -175 -20\n-13 -39 -29 -43 -34 -16 -26 -206 -125 -307 -160 -96 -33 -134 -41 -248 -50\n-164 -13 -684 -16 -760 -4 -54 8 -54 9 -92 73 -21 36 -51 90 -66 120 -48 94\n-127 233 -155 275 -30 45 -35 80 -11 89 9 3 156 6 327 6 443 -1 619 23 852\n116 182 73 268 133 430 298 149 151 218 265 296 488 74 210 71 179 115 1093 8\n176 19 397 24 490 5 94 14 285 20 425 6 140 15 307 20 372 14 162 13 394 -2\n421 -23 44 -91 116 -117 125 -14 4 -188 7 -387 5 -335 -3 -362 -2 -381 14 -20\n17 -21 33 -27 249 -7 248 -7 248 44 256 14 1 258 4 542 6 512 3 517 3 538 -18z\nm-2511 -317 c21 -17 21 -22 12 -123 -27 -285 -43 -376 -86 -500 -13 -36 -39\n-117 -59 -180 -20 -63 -46 -131 -58 -150 -26 -43 -83 -147 -116 -215 -14 -27\n-47 -84 -75 -125 -28 -41 -62 -93 -76 -115 -25 -39 -34 -49 -117 -137 -22 -24\n-58 -65 -80 -93 -21 -27 -48 -57 -59 -65 -11 -8 -38 -33 -60 -55 -90 -90 -180\n-165 -195 -163 -8 2 -26 26 -40 53 -14 28 -35 64 -47 81 -12 17 -42 68 -66\n115 -24 46 -83 154 -131 239 -47 84 -86 161 -86 170 0 9 7 25 15 36 19 25 19\n61 0 114 -16 45 -11 64 26 104 11 11 19 24 19 29 0 9 49 73 107 139 42 48 121\n207 193 388 24 60 90 355 90 402 0 20 6 40 13 45 6 4 199 10 427 13 228 3 418\n7 421 8 4 1 16 -6 28 -15z m-4164 -24 c8 -8 19 -45 24 -84 6 -38 15 -88 21\n-110 5 -22 19 -80 31 -130 37 -155 125 -352 228 -509 67 -103 264 -311 326\n-343 16 -9 57 -37 90 -63 70 -53 362 -200 445 -223 30 -8 89 -21 130 -27 41\n-7 92 -19 114 -26 21 -8 64 -14 95 -14 104 0 103 5 100 -373 -1 -172 -3 -353\n-3 -403 -1 -105 -8 -119 -69 -127 -53 -7 -271 8 -323 22 -21 6 -88 22 -149 37\n-177 41 -293 80 -448 150 -209 95 -289 139 -398 217 -35 26 -86 62 -114 82\n-109 76 -271 212 -303 255 -19 25 -58 72 -88 105 -30 33 -62 71 -71 85 -10 14\n-36 48 -59 77 -23 28 -45 62 -49 74 -4 12 -22 43 -40 68 -85 118 -246 464\n-275 591 -7 30 -19 67 -27 83 -37 74 -64 221 -70 382 -3 104 -1 170 6 187 l10\n28 238 3 c436 5 613 1 628 -14z m5440 -104 c-3 -33 -11 -175 -16 -315 -16\n-378 -26 -578 -33 -645 -3 -33 -11 -175 -16 -315 -14 -348 -31 -472 -98 -690\n-86 -286 -326 -653 -539 -826 -45 -36 -241 -168 -263 -176 -8 -3 -49 -26 -90\n-52 -41 -25 -80 -46 -87 -46 -7 0 -57 -18 -110 -40 -97 -41 -203 -68 -235 -62\n-16 3 -55 65 -123 197 -17 33 -57 106 -88 163 -31 56 -57 109 -57 117 0 8 69\n66 154 129 85 63 179 137 209 163 29 26 73 64 97 83 99 81 381 371 404 417 9\n18 24 37 34 42 9 5 51 55 92 111 41 56 86 116 101 133 14 18 52 77 84 132 33\n55 69 114 80 131 57 87 222 452 270 599 19 55 48 138 65 185 17 47 47 166 66\n265 19 99 39 196 43 215 5 19 12 64 16 100 3 35 11 73 17 85 11 19 12 18 20\n-10 5 -16 6 -57 3 -90z m864 -193 c65 -32 70 -53 61 -252 -5 -96 -14 -299 -19\n-450 -11 -275 -23 -482 -41 -660 -5 -52 -12 -196 -15 -319 -4 -124 -9 -229\n-12 -235 -3 -5 -10 -120 -14 -255 -9 -284 -34 -490 -74 -596 -34 -91 -124\n-260 -167 -316 -55 -71 -180 -200 -208 -214 -14 -7 -46 -34 -72 -59 -65 -62\n-245 -151 -368 -181 -146 -36 -321 -48 -708 -48 -398 0 -383 -3 -427 79 -12\n21 -52 91 -89 154 -93 156 -128 228 -124 252 2 16 24 28 98 54 214 74 318 123\n460 214 25 16 63 39 85 51 98 53 386 344 434 436 11 23 25 45 31 48 13 8 53\n69 103 154 93 164 134 286 206 621 29 131 44 302 57 635 24 611 41 873 56 892\n14 17 40 18 392 15 280 -2 324 -4 355 -20z m-8603 -9 c32 -23 39 -60 39 -198\n1 -157 21 -535 35 -665 6 -47 10 -134 10 -195 0 -122 12 -274 36 -440 30 -218\n163 -594 246 -699 19 -22 46 -61 62 -86 96 -149 120 -178 247 -308 94 -96 121\n-118 229 -189 30 -19 66 -46 80 -58 89 -79 402 -206 617 -250 43 -9 112 -26\n153 -37 70 -20 103 -22 500 -25 234 -2 435 -6 448 -8 12 -3 22 -13 22 -22 0\n-20 -62 -76 -115 -104 -22 -12 -67 -43 -100 -69 -33 -26 -80 -60 -105 -76 -25\n-16 -74 -50 -110 -75 -133 -95 -42 -86 -927 -94 -764 -7 -786 -6 -945 15 -173\n22 -333 61 -383 91 -17 10 -69 37 -115 60 -47 23 -101 55 -121 73 -20 17 -55\n44 -78 59 -23 16 -61 54 -84 85 -23 31 -64 84 -90 117 -58 71 -160 276 -186\n372 -11 37 -22 97 -25 133 -4 36 -11 103 -16 150 -6 47 -21 303 -35 570 -14\n267 -32 602 -40 745 -8 143 -17 323 -20 400 -3 77 -13 255 -21 395 l-15 255\n43 40 43 40 355 3 c195 1 360 -1 366 -5z m214 -317 c69 -225 103 -323 122\n-356 11 -19 33 -70 49 -112 37 -100 64 -154 161 -318 127 -216 162 -272 199\n-321 140 -188 220 -289 271 -342 33 -34 66 -74 74 -89 8 -16 18 -28 23 -28 4\n0 48 -39 97 -86 48 -48 100 -94 115 -103 15 -9 74 -58 130 -108 57 -50 129\n-108 159 -129 30 -20 76 -54 103 -76 26 -22 82 -58 124 -80 42 -22 91 -50 107\n-63 38 -28 281 -159 316 -170 14 -4 59 -23 100 -42 105 -49 251 -98 545 -185\n133 -39 142 -49 78 -93 l-38 -25 -520 0 -521 0 -195 35 c-107 20 -205 40 -219\n45 -135 49 -226 87 -294 124 -45 25 -103 56 -131 70 -27 14 -69 40 -92 58 -23\n18 -70 55 -105 82 -72 57 -193 177 -234 233 -15 21 -34 43 -41 49 -32 27 -127\n177 -174 274 -28 58 -66 136 -85 174 -19 38 -34 79 -34 92 0 13 -9 50 -19 81\n-47 141 -75 340 -91 638 -5 110 -15 299 -21 420 -7 121 -14 281 -16 355 -3\n121 -2 133 11 116 9 -10 29 -64 46 -120z m4530 -215 c18 -34 90 -245 90 -265\n0 -33 -72 -89 -191 -149 -200 -100 -223 -108 -475 -151 -111 -20 -148 -20\n-163 -3 -6 8 -12 71 -14 156 -4 175 -3 178 98 192 203 28 419 110 515 194 49\n43 123 57 140 26z m165 -431 c18 -12 47 -20 72 -20 l43 0 36 -72 c20 -40 46\n-88 59 -107 12 -20 44 -79 70 -131 27 -52 65 -120 86 -151 20 -30 44 -71 52\n-91 9 -20 27 -54 41 -75 32 -46 33 -69 4 -84 -13 -7 -61 -37 -108 -67 -47 -31\n-107 -64 -134 -75 -28 -10 -61 -26 -75 -36 -14 -10 -37 -22 -51 -26 -14 -4\n-45 -18 -70 -30 -56 -28 -341 -125 -368 -125 -11 0 -62 -13 -113 -28 -73 -23\n-132 -32 -267 -42 -118 -9 -176 -10 -183 -3 -17 17 -19 862 -3 878 7 7 35 16\n61 19 248 36 461 100 637 192 77 41 144 78 150 84 14 14 27 12 61 -10z m609\n-917 c88 -145 118 -198 141 -253 13 -30 49 -98 79 -150 69 -116 74 -134 50\n-167 -21 -27 -45 -42 -114 -73 -25 -11 -56 -29 -70 -40 -27 -22 -195 -94 -315\n-136 -38 -13 -115 -42 -170 -63 -115 -45 -400 -117 -524 -132 -47 -5 -88 -12\n-92 -14 -7 -5 -281 -35 -316 -35 -38 0 -26 17 35 51 90 52 177 141 202 208 12\n31 32 84 46 119 13 34 24 77 24 95 0 47 -27 197 -42 234 -6 18 -9 35 -6 38 3\n3 61 21 129 40 307 84 607 209 776 323 98 66 100 65 167 -45z m-1665 -368 c33\n-17 41 -33 41 -84 0 -45 -12 -61 -70 -93 -25 -13 -54 -29 -65 -36 -11 -6 -53\n-25 -92 -42 -82 -35 -107 -31 -117 18 -11 48 12 173 39 214 l25 38 106 0 c73\n0 114 -5 133 -15z m474 -13 c35 -37 47 -80 47 -172 0 -84 -19 -165 -48 -212\n-11 -18 -54 -61 -95 -98 -67 -58 -83 -68 -147 -83 -55 -13 -76 -15 -86 -6 -15\n13 -17 161 -5 424 l6 140 35 17 c27 14 61 18 151 18 113 0 116 0 142 -28z\nm1589 -351 c15 -29 48 -86 73 -126 25 -40 45 -76 45 -79 0 -4 18 -37 40 -73\n39 -65 48 -97 32 -107 -4 -2 -64 -12 -132 -20 -93 -12 -266 -17 -670 -21 -524\n-6 -730 -1 -730 16 0 4 35 15 78 25 245 54 499 132 697 214 83 34 182 74 220\n89 39 14 86 36 105 48 19 12 55 30 80 41 25 11 54 27 65 36 37 30 67 16 97\n-43z m-2020 -90 c8 -101 -1 -131 -39 -131 -39 0 -123 55 -123 80 0 24 119 141\n140 137 11 -2 17 -23 22 -86z m-261 -161 c20 0 42 -6 48 -13 6 -8 29 -22 51\n-32 55 -25 54 -49 -2 -42 -24 3 -97 10 -163 16 -120 10 -175 22 -175 39 0 15\n36 43 66 51 17 4 52 2 84 -6 30 -7 71 -13 91 -13z m722 -227 c5 -27 16 -47 29\n-54 29 -16 1533 -6 1603 11 103 23 155 29 183 19 30 -10 33 -15 112 -164 29\n-55 63 -113 75 -130 34 -46 77 -135 72 -150 -4 -10 -215 -14 -1014 -20 -554\n-4 -1018 -11 -1030 -16 -19 -7 -23 -16 -23 -48 0 -22 4 -42 9 -45 5 -4 478 -6\n1051 -6 847 -1 1048 -3 1074 -14 25 -10 44 -34 82 -100 27 -48 72 -127 101\n-176 52 -89 107 -195 124 -237 21 -56 162 -52 -2129 -53 -1159 0 -2369 -2\n-2688 -4 -345 -2 -587 0 -595 5 -11 8 -4 19 31 50 52 47 73 62 365 256 182\n121 255 170 330 224 l47 34 685 7 c377 4 691 9 699 12 18 7 18 70 0 85 -10 9\n-160 11 -576 10 -571 -2 -600 0 -572 34 15 18 238 177 248 177 4 0 21 11 38\n24 17 13 41 26 54 30 12 4 29 20 37 36 9 18 37 39 77 59 35 17 76 41 91 53 28\n22 35 23 314 28 267 5 286 6 299 24 8 11 14 32 14 47 0 18 6 29 18 31 9 2 183\n3 387 3 l369 0 9 -42z\"/\u003e\u003cpath d=\"M5060 6060 c-182 -40 -264 -72 -379 -149 -29 -20 -72 -47 -95 -61\n-47 -28 -193 -170 -221 -215 -11 -16 -34 -48 -52 -71 -34 -43 -123 -222 -123\n-249 0 -21 42 -35 77 -26 23 6 32 19 52 67 12 32 33 73 46 89 12 17 30 45 39\n63 21 40 51 72 69 72 11 0 10 -20 -5 -102 -11 -57 -24 -118 -29 -135 -6 -18\n-7 -37 -4 -43 7 -12 74 -13 92 -2 6 4 19 40 27 80 18 89 60 187 97 227 15 17\n41 55 58 86 49 88 152 169 275 217 56 22 121 43 146 47 73 12 81 20 78 73 -3\n44 -5 47 -33 49 -16 1 -68 -7 -115 -17z\"/\u003e\u003cpath d=\"M5338 6074 c-13 -12 -9 -89 4 -102 7 -7 31 -12 55 -12 50 0 144 -31\n254 -84 165 -79 345 -334 357 -503 5 -70 17 -86 63 -85 71 2 73 42 12 220 -19\n57 -33 105 -30 108 11 11 110 -101 136 -155 84 -166 84 -166 129 -169 59 -4\n62 13 18 108 -98 215 -256 406 -406 491 -34 19 -90 51 -126 72 -104 61 -437\n141 -466 111z\"/\u003e\u003cpath d=\"M4444 5165 c-3 -8 -1 -36 5 -62 5 -27 13 -68 17 -93 9 -63 78 -214\n130 -283 89 -118 225 -220 371 -277 83 -33 122 -42 173 -44 l65 -1 3 39 c2 21\n-1 43 -6 48 -6 6 -47 16 -93 24 -138 24 -309 133 -399 253 -22 29 -40 64 -40\n77 l0 24 251 0 c153 0 258 4 270 10 14 8 19 21 19 50 0 21 -5 42 -11 46 -6 3\n-141 6 -300 6 -257 -1 -290 1 -307 16 -24 21 -42 73 -42 121 0 21 -5 42 -12\n49 -17 17 -87 15 -94 -3z\"/\u003e\u003cpath d=\"M6020 5161 c-5 -11 -10 -31 -10 -46 0 -35 -35 -102 -63 -117 -16 -9\n-103 -14 -317 -18 l-295 -5 0 -45 0 -45 271 -3 c311 -3 310 -3 279 -73 -24\n-52 -139 -155 -244 -219 -77 -46 -214 -90 -280 -90 -24 0 -45 -41 -36 -70 12\n-39 28 -41 134 -19 83 17 124 32 233 89 120 62 137 75 202 148 104 116 193\n298 216 439 12 71 1 93 -45 93 -24 0 -38 -6 -45 -19z\"/\u003e\u003cpath d=\"M991 5261 c-24 -24 -18 -49 13 -56 11 -3 75 -4 140 -3 100 3 121 6\n130 21 8 12 8 22 0 35 -9 14 -30 17 -137 20 -115 2 -128 1 -146 -17z\"/\u003e\u003cpath d=\"M5182 10099 c-5 -13 -17 -60 -27 -104 -45 -208 -50 -215 -165 -215\n-57 0 -84 -5 -110 -20 -19 -11 -60 -33 -90 -49 -180 -95 -292 -369 -236 -581\n33 -125 128 -245 244 -309 31 -17 73 -41 92 -52 31 -18 49 -20 156 -17 103 3\n125 6 143 22 24 22 27 63 8 91 -12 16 -18 16 -47 7 -18 -7 -72 -12 -120 -12\n-81 0 -90 2 -123 28 -20 16 -56 36 -80 46 -92 35 -187 206 -187 336 0 64 26\n148 63 206 88 138 276 223 429 194 83 -16 83 -16 81 227 -2 201 -11 257 -31\n202z\"/\u003e\u003cpath d=\"M5342 9688 c-7 -7 -12 -40 -12 -73 0 -59 2 -63 38 -92 26 -22 45 -50\n64 -99 51 -130 53 -147 34 -228 -19 -82 -69 -171 -107 -189 -20 -11 -24 -21\n-27 -67 -4 -62 4 -100 19 -100 17 0 66 45 111 101 139 176 141 465 5 646 -13\n18 -44 51 -69 72 -34 30 -48 37 -56 29z\"/\u003e\u003cpath d=\"M4190 8333 c-19 -2 -67 -10 -106 -18 -39 -8 -116 -19 -170 -25 -55\n-6 -124 -17 -154 -24 -30 -8 -95 -19 -145 -26 -104 -14 -149 -26 -163 -43 -22\n-26 -23 -62 -2 -102 11 -21 20 -44 20 -50 0 -19 -62 -71 -135 -113 -38 -22\n-96 -62 -127 -89 -31 -26 -78 -64 -104 -83 -59 -43 -187 -163 -268 -250 -133\n-142 -141 -148 -227 -180 -46 -16 -91 -30 -101 -30 -37 0 -79 -32 -109 -83\n-16 -29 -45 -72 -64 -97 -104 -139 -251 -420 -271 -517 -7 -37 10 -73 35 -73\n23 0 161 62 199 89 38 28 76 35 91 18 6 -8 18 -53 25 -100 8 -47 19 -94 25\n-106 40 -74 121 -27 175 103 8 20 26 51 40 68 13 18 35 58 49 88 13 30 43 87\n67 125 116 187 112 179 120 308 7 113 9 119 44 170 20 28 61 75 92 102 30 28\n109 102 175 165 66 63 132 121 146 129 14 7 69 44 122 82 52 38 104 69 114 69\n11 0 37 -16 58 -35 31 -27 48 -35 78 -35 48 0 103 42 339 260 27 25 84 74 126\n110 84 70 101 97 91 147 -5 27 -34 58 -47 51 -2 0 -19 -3 -38 -5z m-140 -148\nc0 -8 -129 -128 -186 -173 -29 -22 -67 -57 -86 -76 -41 -42 -66 -45 -97 -12\n-13 14 -36 30 -51 36 -26 11 -29 17 -35 82 -5 51 -4 72 5 78 7 4 60 15 119 24\n58 10 135 23 171 30 67 14 160 20 160 11z m-1266 -938 c0 -15 -1 -69 -2 -120\n-2 -92 -3 -95 -46 -163 -23 -38 -60 -98 -80 -134 -60 -107 -123 -204 -134\n-208 -15 -5 -28 24 -37 78 -15 99 -46 112 -146 63 -64 -31 -73 -33 -86 -20\n-14 14 -12 21 14 69 62 111 99 171 130 211 18 23 51 70 73 103 l40 62 89 22\nc48 12 106 32 127 45 47 29 59 27 58 -8z\"/\u003e","family":{"RA2096":"RA-1103","RA3146":"RA-1003","RA3186":"RA-2002","RA3246":null},"own":{"RA2096":["*"],"RA3146":["1x3x8.5","1.5x3x8.5","2x3x8.5","3x4x8.5","4x6x8.5","1.5x3x10","2x3x10","3x4x10","4x6x10#2"],"RA3186":["4x6x10#1"]}}